Make sure this part fits

GM 15705563
Release Bearing

1996-2003 GM

Customer Questions & Expert Answers (4)
GM 15705563 Release Bearing
  • Part Description
    Bearing, Clutch Release; Clutch Release Bearing; Clutch Kit
  • Manufacturer
    General Motors
Make sure this part fits
$58.12 MSRP: $109.13
You Save: $51.01 (47%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    1999-2000 Cadillac EscaladeBase8 Cyl 5.7 L GAS
    1996-2002 Chevrolet BlazerBase, LS, LT, Trailblazer, Xtreme6 Cyl 4.3 L GAS
    1996-1999 Chevrolet C1500Base, Cheyenne, LS, Silverado, WT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
    1996-1999 Chevrolet C1500 SuburbanBase, LS, LT8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
    1996-2000 Chevrolet C2500Base, Cheyenne, LS, Silverado, WT8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1996-1999 Chevrolet C2500 SuburbanBase, LS, LT8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1996-2000 Chevrolet C3500Base, Cheyenne, LS, Silverado8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1996-2002 Chevrolet CamaroBase, RS, Z28, Z28 SS6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS
    1996-1999 Chevrolet K1500Base, Cheyenne, LS, Silverado, WT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
    1996-1999 Chevrolet K1500 SuburbanBase, LS, LT8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15705563 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15705563 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to Address Issues with the Release Bearing on a Chevrolet Camaro? Posted by Customer
    A:
    Replace the clutch Release Bearing with these steps: remove first the manual transmission and then remove the clutch Release Bearing while rotating it either way so compression spring pressure drives it out of the clutch actuator cylinder end. During new clutch Release Bearing (B-12345) installation avoid exposing the quill to any chemicals and do not apply grease because the bearing comes factory pre-filled with original grease. You must clean the exposed part of the actuator cylinder quill with a dry cloth before you fully press the new clutch Release Bearing to its seat over the retainer tab which holds it to the actuator cylinder. Finally, reinstall the manual transmission.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the clutch release bearing on Chevrolet Camaro? Posted by Customer
    A:
    To replace the clutch Release Bearing, removing the manual transmission and then rotating the clutch Release Bearing in either direction, releasing the compression spring load to force the bearing off end of the clutch actuator cylinder. When fitting the new clutch Release Bearing, make sure that the quill is cleaned using a clean dry cloth and do not use any cleaners or chemicals on the quill at all, do not grease the quill or the new bearing as it's pre-greased. Push firmly on the new clutch Release Bearing to place it until it snaps over the retainer tab into actuator cylinder while reinserting the manual transmission.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you install the new clutch release bearing for the 2000 Chevrolet Camaro? Posted by Customer
    A:
    Firmly push the new clutch release bearing into place until it snaps over the retainer tab, ensuring it is self-retained to the actuator cylinder.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Release Bearing
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Release Bearing 15705563 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15705563 Release Bearing is available in the market under the name GM Release Bearing. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15705563 Release Bearing fits certain Chevrolet S10, Tahoe, Camaro models, as well as GMC Sierra 1500, Yukon, Sonoma. Additionally, it is compatible with Cadillac Escalade and Pontiac Firebird models.
The original GM component designated by manufacturer part number 15705563 maintains top performance when functioning as the Bearing, Clutch Release; Clutch Release Bearing; Clutch Kit unit. The component 15705563 is constructed from durable material and its dimensions span 4.3 x 4.1 x 2.2 inches while weighing 1.00 Pounds. The component is ready in New condition to ensure full compatibility with your vehicle system. The part 15705563 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.