OEM 2001 Chevrolet Cavalier Antenna Cable

2001 Chevrolet Cavalier Antenna Cable Parts Questions & Experts Answers

• Q: How to replace the coaxial antenna cable on 2001 Chevrolet Cavalier?

  A: Start your coaxial Antenna Cable replacement job by removing the rear shelf trim panel followed by the rear seat cushion and rear seat back and then proceed to take out the right carpet retainers, center pillar trim panel, and right instrument panel insulator. Reach under the carpet for wiring harness access when possible while you disconnect both Antenna Cable ends from amplifier connections and radio ports. Remove the visible ends from the coaxial Antenna Cable in both instrument panel and rear shelf locations. Secure the antenna extension cable to the wiring harness top at regular intervals of 150mm (6 inches) with electrical tape. This installation method applies to the new coaxial antenna cables. Follow this order: attach the coaxial Antenna Cable to the radio's back before reinstalling the radio unit and then position the right instrument panel insulator and center pillar trim panel and right carpet retainers in that order. Follow these steps: guide the coaxial cable from the harness to install it near the shelf as you attach it to the amplifier, then replace shelf trim panels and seat elements in order.