How to replace the coolant pipe on the intake on 2001 Chevrolet Cavalier?

Before changing the Coolant Pipe on the intake, drain the cooling system first. Next, remove the upper Radiator Hose and heater hose from races on the radiator inlet pipe, then the surge tank by-pass hose. After that, disconnect the electrical connector from the coolant sensor and remove the generator. Remove the retainer of the radiator inlet pipe and detach the wiring harness from it, and take off the nut and bolt which fix the radiator inlet pipe to the engine block. Remove the inlet pipe stud from the Cylinder Head and then take off the radiator inlet pipe. To install, start by installing the incoming radiator pipe and fasten it to the Cylinder Head using the inlet pipe stud. Make sure you tighten the nut and bolt at the torque values of 14nm (10 ft. Lbs.) as per the fastener notice. Connect the retainer on the radiator inlet pipe with the wiring harness and connect the electrical with the coolant sensor. Finally, reinstall the generator, then reconnect the surge tank by-pass hose, and the upper Radiator Hose as well as the heater hose to the inlet pipe. Finally, fill the cooling system.

OEM 2001 Chevrolet Cavalier Coolant Pipe

Engine Cooler Pipe

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Coolant Pipes found

View related parts
2001 Chevrolet Cavalier Upper Hose
Part Number: 22698459
Product Specifications
- Other Name: Hose-Radiator Inlet; Multi Purpose Hose; Radiator Hose; Hose, Radiator Inlet (Upper)
- Replaces: 22618825, 22617669, 22656323
- Item Weight: 0.90 Pounds
- Item Dimensions: 15.3 x 5.5 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22698459
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Cavalier Submodels:
- Base, LS, LS Sport, RS | 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS
View related parts
2001 Chevrolet Cavalier Coolant Hose
Part Number: 22612390
Product Specifications
- Other Name: Hose Assembly-Radiator Surge Tank Inlet; Coolant Reservoir Hose; Multi Purpose Hose; Radiator Hose; Cooling Hose; Reservoir Hose; Overflow Hose; Hose, Engine Coolant Recovery
- Replaces: 22640553
- Item Weight: 0.40 Pounds
- Item Dimensions: 16.7 x 3.1 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22612390
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Cavalier Submodels:
- Base, LS, LS Sport, RS, Z24 | 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
2001 Chevrolet Cavalier Coolant Hose
Part Number: 22659620
Product Specifications
- Other Name: Hose, Engine Coolant Recovery; Coolant Reservoir Hose; Multi Purpose Hose; Radiator Hose; Cooling Hose; Overflow Hose
- Item Weight: 0.50 Pounds
- Item Dimensions: 13.3 x 6.1 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22659620
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Cavalier Submodels:
- Base, LS, LS Sport, RS, Z24 | 4 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS
View related parts
2001 Chevrolet Cavalier Coolant Hose
Part Number: 22653406
Product Specifications
- Other Name: Hose, Engine Coolant Recovery; Radiator Hose; Cooling Hose
- Item Weight: 0.90 Pounds
- Item Dimensions: 12.9 x 2.4 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22653406
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Cavalier Submodels:
- Base, LS, LS Sport, RS | 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS

2001 Chevrolet Cavalier Coolant Pipe

With a comprehensive array of OEM 2001 Chevrolet Cavalier Coolant Pipe, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 Chevrolet Cavalier Coolant Pipe are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2001 Chevrolet Cavalier Parts Questions & Experts Answers

Q: How to replace the coolant pipe on the intake on 2001 Chevrolet Cavalier?
A: Before changing the Coolant Pipe on the intake, drain the cooling system first. Next, remove the upper Radiator Hose and heater hose from races on the radiator inlet pipe, then the surge tank by-pass hose. After that, disconnect the electrical connector from the coolant sensor and remove the generator. Remove the retainer of the radiator inlet pipe and detach the wiring harness from it, and take off the nut and bolt which fix the radiator inlet pipe to the engine block. Remove the inlet pipe stud from the Cylinder Head and then take off the radiator inlet pipe. To install, start by installing the incoming radiator pipe and fasten it to the Cylinder Head using the inlet pipe stud. Make sure you tighten the nut and bolt at the torque values of 14nm (10 ft. Lbs.) as per the fastener notice. Connect the retainer on the radiator inlet pipe with the wiring harness and connect the electrical with the coolant sensor. Finally, reinstall the generator, then reconnect the surge tank by-pass hose, and the upper Radiator Hose as well as the heater hose to the inlet pipe. Finally, fill the cooling system.