ChevyParts
My Garage
My Account
Cart
OEM 2001 Chevrolet Tracker Brake Dust Shields
Brake Backing Plate- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Brake Dust Shields found
2001 Chevrolet Tracker Backing Plate Part Number: 91177515
Product Specifications- Other Name: Plate, Brake Flange/Backing; Brake Dust Shield
- Item Weight: 1.40 Pounds
- Item Dimensions: 11.1 x 11.1 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 91177515
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2001 Chevrolet Tracker Backing Plate Part Number: 91177514
Product Specifications- Other Name: Plate; Brake Dust Shield; Plate, Brake Flange/Backing
- Item Weight: 0.70 Pounds
- Item Dimensions: 11.0 x 11.1 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 91177514
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: Shield; Brake Dust Shield; Splash Shield; Shield, Brake Flange Plate
- Position: Driver Side
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 30023816
- Warranty: This genuine part is guaranteed by GM's factory warranty.
- Product Specifications
- Other Name: Shield; Brake Dust Shield; Splash Shield; Shield, Brake Flange Plate
- Position: Passenger Side
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 30023815
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2001 Chevrolet Tracker Brake Dust Shields
With a comprehensive array of OEM 2001 Chevrolet Tracker Brake Dust Shields, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 Chevrolet Tracker Brake Dust Shields are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2001 Chevrolet Tracker Brake Dust Shields Parts and Q&A
- Q: How to replace the front brake dust shields on 2001 Chevrolet Tracker?A: You start replacing the front disc Brake Dust Shields after supporting the car at its lifted position following tire and wheel removal. Move forward by removing the brake rotor before taking out the hub with its bearings and seals. Detach the 4 dust shield bolts from the spindle before removing the dust shield from its location. Attach the brake dust shield to the spindle using the fastener notice guidelines prior to installing its 4 bolts which need to be tightened to 50 nm (36.5 ft. Lbs.). Attach the wheel hub elements first then mount the brake rotor and tire wheel assembly into position. Put the vehicle back to ground level and test the wheel alignment while adjusting both settings if needed.
Related 2001 Chevrolet Tracker Parts
2001 Chevrolet Tracker Brake Proportioning Valve
2001 Chevrolet Tracker ABS Control Module
2001 Chevrolet Tracker ABS Sensor
2001 Chevrolet Tracker Brake Caliper Bolt
2001 Chevrolet Tracker Brake Calipers
2001 Chevrolet Tracker Brake Line
2001 Chevrolet Tracker Brake Master Cylinder
2001 Chevrolet Tracker Parking Brake Shoe
2001 Chevrolet Tracker Wheel Bearing
2001 Chevrolet Tracker Wheel Hub
2001 Chevrolet Tracker Wheel Hub Bolt
2001 Chevrolet Tracker Wheel Speed Sensor