How to replace the coolant reservoir on 2001 Chevrolet Venture?

The replacement of the coolant recovery reservoir requires you to remove the reservoir hose clamp followed by disconnecting the hose from the radiator overflow fitting. The next step is to remove both mounting clips and take out the coolant reservoir. Wash the reservoir with soap and clear water then rinse it with pure water. Place the coolant reservoir in position before fixing it into place with mounting clips. Clean water should be used to lubricate the reservoir hose which must be connected to the radiator overflow fitting before the clamp attachment. Finally, refill the coolant reservoir.

OEM 2001 Chevrolet Venture Coolant Reservoir

Coolant Tank Reservoir

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Coolant Reservoir found

View related parts
2001 Chevrolet Venture Reservoir
Part Number: 15250668
Product Specifications
- Other Name: Reservoir, Engine Coolant Recovery; Coolant Reservoir
- Replaces: 10311259, 10295298
- Item Weight: 1.30 Pounds
- Item Dimensions: 15.2 x 12.6 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15250668
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Chevrolet Venture Submodels:
- Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS

2001 Chevrolet Venture Coolant Reservoir

With a comprehensive array of OEM 2001 Chevrolet Venture Coolant Reservoir, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 Chevrolet Venture Coolant Reservoir are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2001 Chevrolet Venture Coolant Reservoir Parts Questions & Experts Answers

Q: How to replace the coolant reservoir on 2001 Chevrolet Venture?
A: The replacement of the coolant recovery reservoir requires you to remove the reservoir hose clamp followed by disconnecting the hose from the radiator overflow fitting. The next step is to remove both mounting clips and take out the coolant reservoir. Wash the reservoir with soap and clear water then rinse it with pure water. Place the coolant reservoir in position before fixing it into place with mounting clips. Clean water should be used to lubricate the reservoir hose which must be connected to the radiator overflow fitting before the clamp attachment. Finally, refill the coolant reservoir.