How to replace the rear brake proportioning valve on 2001 GMC Savana 3500?

In order to order the replacement of the combination valve, mark the identification code. Lift the car and take off the shield. Unhook the electrical connector and brake pipes of the valve. Take off the valve and place others in their place and clamp them down to the BPMV. Install the brake hydraulic system bleed, connect the electrical connector, and brake pipes.

OEM 2001 GMC Savana 3500 Brake Proportioning Valve

Proportioning Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Proportioning Valve found

View related parts
2001 GMC Savana 3500 Pressure Metering Valve Part Number: 12548265
Product Specifications
- Other Name: Valve Kit, Brake Combination; Brake Proportioning Valve; Valve; Valve Kit, Hydraulic Brake Combination/Monitoring Valve; Valve, Hydraulic Brake Combination/Monitoring Valve
- Item Weight: 1.40 Pounds
- Item Dimensions: 8.5 x 4.9 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12548265
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 GMC Savana 3500 Submodels:
- Base, SLE, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS, 8 Cyl 8.1 L GAS

2001 GMC Savana 3500 Brake Proportioning Valve

With a comprehensive array of OEM 2001 GMC Savana 3500 Brake Proportioning Valve, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 GMC Savana 3500 Brake Proportioning Valve are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2001 GMC Savana 3500 Brake Proportioning Valve Parts and Q&A

Q: How to replace the rear brake proportioning valve on 2001 GMC Savana 3500?
A: In order to order the replacement of the combination valve, mark the identification code. Lift the car and take off the shield. Unhook the electrical connector and brake pipes of the valve. Take off the valve and place others in their place and clamp them down to the BPMV. Install the brake hydraulic system bleed, connect the electrical connector, and brake pipes.