ChevyParts
My Garage
My Account
Cart
OEM 2001 GMC Savana 3500 Brake Line
Brake Hose- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
5 Brake Lines found
2001 GMC Savana 3500 Flex Hose, Rear Part Number: 19366771
Product Specifications- Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear
- Replaces: 22113465, 94665587
- Item Weight: 0.60 Pounds
- Item Dimensions: 2.1 x 18.9 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366771
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Passenger Side
- Replaces: 22163514
- Item Weight: 1.30 Pounds
- Item Dimensions: 4.0 x 25.8 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366729
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2001 GMC Savana 3500 Flex Hose, Front Part Number: 22163605
Product Specifications- Other Name: Hose Assembly-Front Brake *Marked Print; Hydraulic Hose; Brake Hose; Brake Line
- Position: Front
- Replaced by: 19366731
- Item Weight: 1.30 Pounds
- Item Dimensions: 4.1 x 25.5 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22163605
- Warranty: This genuine part is guaranteed by GM's factory warranty.
- Product Specifications
- Other Name: Hose Assembly-Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Driver Side
- Item Weight: 0.80 Pounds
- Item Dimensions: 27.7 x 5.1 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22163513
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2001 GMC Savana 3500 Flex Hose, Front Part Number: 19366732
$67.76 MSRP: $121.00You Save: $53.24 (44%)Product Specifications- Other Name: Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front
- Replaces: 22163606
- Item Weight: 1.30 Pounds
- Item Dimensions: 6.4 x 25.2 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366732
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2001 GMC Savana 3500 Brake Line
With a comprehensive array of OEM 2001 GMC Savana 3500 Brake Line, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 GMC Savana 3500 Brake Line are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2001 GMC Savana 3500 Brake Line Parts Questions & Experts Answers
- Q: How to replace the rear brake line on 2001 GMC Savana 3500?A: Raise the vehicle and support it before cleaning all foreign material from both brake hoses and pipes. Put rubber seals over brake pipe ends to stop brake fluid leaks and polluting. Sensor the brake hose using a back up wrench to remove the brake pipe fitting and end the hose effectively without distorting either part. Remove the brake hose retention clip from its bracket followed by fitting caps and plugs to protect open brake pipe ends. Disconnect the rear brake pipes from the roadway junction block located on the back axle while also sealing their ends. Unscrew the axle retaining bolt to take out the brake hose from the vehicle system. Install the rear brake hose on the vehicle while following the important fastener notice found under service precautions. Fasten the junction block retaining bolt to the rear axle and set it to 20 nm torque. Join the rear brake pipes to the junction block on the axle and fasten them tight at 20 nm (15 ft. Lbs.). Wired in a parallel fashion, the hose should stay away from suspension parts and be secured securely. When the vehicle rests on suspension put the brake hose into the bracket then remove protection caps from brake pipe fittings to join brake pipe fittings with brake hoses through back up wrench handling. When done tighten the rear brake pipes to the brake hose at 20 nm (15 ft. Lbs.) and complete the hydraulic brake system bleeding process.