How Should Brake Lines Be Replaced to Ensure Safety and Proper Functionality on 2002 GMC Savana 3500?

When replacing brake pipes, never use any other type of pipe other than double-walled steel brake pipes to avoid the braking system malfunction and ensure that you route and retain the new pipe with appropriate fasteners in their original place to avoid personal injury. Keep parallel brake pipes at a 6 mm (1/4 inch) gap. First, disconnect the brake pipe fittings and get rid of the brake pipe fasteners on the vehicle before you remove the brake pipe. Bend the new brake pipe for a suitable reengineering and install it making sure of clearance of 19mm (3/4 inch) away from all moving or vibrating parts and later tighten it using fasteners. Fasten the brake pipe fittings while aligning them to 20 Nm (15 ft. lbs) for BPMV or wheel jounce hoses and 30 Nm (22 ft. lbs) for the master. Finally, perform bleed the brake hydraulic system through the automated bleed process according to the specific procedure depending on the location of the replaced brake pipe, or using the corresponding manual or pressure bleeding method through the hydraulic brake system.

OEM 2002 GMC Savana 3500 Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Brake Lines found

View related parts
2002 GMC Savana 3500 Flex Hose, Rear
Part Number: 19366771
Product Specifications
- Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear
- Replaces: 22113465, 94665587
- Item Weight: 0.60 Pounds
- Item Dimensions: 2.1 x 18.9 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366771
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 GMC Savana 3500 Submodels:
- Base, SLE, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS, 8 Cyl 8.1 L GAS
View related parts
2002 GMC Savana 3500 Flex Hose, Front Passenger Side
Part Number: 19366729
Product Specifications
- Other Name: Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Passenger Side
- Replaces: 22163514
- Item Weight: 1.30 Pounds
- Item Dimensions: 4.0 x 25.8 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366729
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 GMC Savana 3500 Submodels:
- Base, SLE, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS, 8 Cyl 8.1 L GAS
View related parts
2002 GMC Savana 3500 Flex Hose, Front
Part Number: 22163605
Product Specifications
- Other Name: Hose Assembly-Front Brake *Marked Print; Hydraulic Hose; Brake Hose; Brake Line
- Position: Front
- Replaced by: 19366731
- Item Weight: 1.30 Pounds
- Item Dimensions: 4.1 x 25.5 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22163605
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 GMC Savana 3500 Submodels:
- Base, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 8.1 L GAS
View related parts
2002 GMC Savana 3500 Flex Hose, Front Driver Side
Part Number: 22163513
Product Specifications
- Other Name: Hose Assembly-Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Driver Side
- Item Weight: 0.80 Pounds
- Item Dimensions: 27.7 x 5.1 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22163513
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 GMC Savana 3500 Submodels:
- Base, SLE, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS, 8 Cyl 8.1 L GAS
View related parts
2002 GMC Savana 3500 Flex Hose, Front
Part Number: 19366732
$67.76 MSRP: $121.00
You Save: $53.24 (44%)
Product Specifications
- Other Name: Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front
- Replaces: 22163606
- Item Weight: 1.30 Pounds
- Item Dimensions: 6.4 x 25.2 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366732
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 GMC Savana 3500 Submodels:
- Base, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 8.1 L GAS

2002 GMC Savana 3500 Brake Line

With a comprehensive array of OEM 2002 GMC Savana 3500 Brake Line, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 GMC Savana 3500 Brake Line are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2002 GMC Savana 3500 Brake Line Parts Questions & Experts Answers

Q: How Should Brake Lines Be Replaced to Ensure Safety and Proper Functionality on 2002 GMC Savana 3500?
A: When replacing brake pipes, never use any other type of pipe other than double-walled steel brake pipes to avoid the braking system malfunction and ensure that you route and retain the new pipe with appropriate fasteners in their original place to avoid personal injury. Keep parallel brake pipes at a 6 mm (1/4 inch) gap. First, disconnect the brake pipe fittings and get rid of the brake pipe fasteners on the vehicle before you remove the brake pipe. Bend the new brake pipe for a suitable reengineering and install it making sure of clearance of 19mm (3/4 inch) away from all moving or vibrating parts and later tighten it using fasteners. Fasten the brake pipe fittings while aligning them to 20 Nm (15 ft. lbs) for BPMV or wheel jounce hoses and 30 Nm (22 ft. lbs) for the master. Finally, perform bleed the brake hydraulic system through the automated bleed process according to the specific procedure depending on the location of the replaced brake pipe, or using the corresponding manual or pressure bleeding method through the hydraulic brake system.