Make sure this part fits

GM 19366771
Flex Hose, Rear

1988-2002 GM

Customer Questions & Expert Answers (15)
GM 19366771 Flex Hose, Rear
GM 19366771 Flex Hose, Rear
  • Part Description
    Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line
  • Position
    Rear
  • Replaces
    22113465, 94665587
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    1999-2000 Cadillac EscaladeBase8 Cyl 5.7 L GAS
    1992-1994 Chevrolet BlazerBase, Cheyenne, Silverado, Silverado Sport8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
    1988-1999 Chevrolet C1500454 SS, Base, Cheyenne, LS, Scottsdale, Silverado, WT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1992-1999 Chevrolet C1500 SuburbanBase, LS, LT, Silverado8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
    1988-2000 Chevrolet C2500Base, Cheyenne, LS, Scottsdale, Silverado, WT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1992-1999 Chevrolet C2500 SuburbanBase, LS, LT, Silverado8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1988-2000 Chevrolet C3500Base, Cheyenne, LS, Scottsdale, Silverado8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1996-2002 Chevrolet Express 1500Base, LS, LT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
    1996-2002 Chevrolet Express 2500Base, LS6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
    1996-2002 Chevrolet Express 3500Base, LS6 Cyl 4.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS, 8 Cyl 8.1 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 19366771 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19366771 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    Should You Always Use Double-Walled Steel Brake Line for Replacement on Cadillac Escalade? Posted by Customer
    A:
    It is important to use double-walled steel brake pipe during any brake pipe replacement to stop brake system failure. Route and reuse the replacement brake pipes as prescribed by the correct fastener placements provided in the manual. You must ensure that the routing and retention are proper so that the brake pipes and the whole brake system do not become damaged and harm you. It is also important to make sure there is a 6 mm (0.25 inch) distance between brake lines that run side by side on the rotors.
    Posted by ChevyPartsGiant Specialist
    Q:
    How should the rear brake pipes on the axle be connected to the brake hose for the 2002 Chevrolet Express 2500? Posted by Customer
    A:
    Connect the rear brake pipes on the axle to the brake hose, tightening them to 20 Nm (15 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done after completing the installation for the 2000 Chevrolet Express 3500? Posted by Customer
    A:
    Bleed the brake hydraulic system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the torque specification for tightening the bolt for the 2000 Chevrolet K3500? Posted by Customer
    A:
    Tighten the bolt to 44 Nm (32 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be removed after disconnecting the brake pipe fitting for the 2001 Chevrolet Express 3500? Posted by Customer
    A:
    Remove the brake hose retaining clip from the hose mounting bracket, then take out the front brake hose retaining bolt and bracket from the upper control arm, followed by the brake hose to caliper bolt from the brake caliper.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the required clearance between parallel brake pipes for the 2000 Chevrolet Tahoe? Posted by Customer
    A:
    Maintain a clearance of 6 mm (0.25 inch) between brake pipes that run parallel to each other.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the next step after securing the new brake hose for the 2000 Chevrolet Tahoe? Posted by Customer
    A:
    Attach the brake hose bolt and bracket to the axle, tightening it to 25 N.m (18 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the torque specification for tightening the fittings for the 2001 GMC Savana 2500? Posted by Customer
    A:
    Tighten them to 20 Nm (15 ft. lbs.) for the BPMV or wheel jounce hoses and to 30 Nm (22 ft. lbs.) for the master cylinder.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the torque specification for tightening the bolt for the 2000 GMC C3500? Posted by Customer
    A:
    Tighten the bolt to 44 Nm (32 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the final step in securing the brake hose for the 2000 GMC C2500? Posted by Customer
    A:
    Install the brake hose retaining clip and connect the brake pipe, tightening the bolt to 25 N.m (18 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done after cleaning the hose fittings for the 2000 GMC Savana 3500? Posted by Customer
    A:
    Disconnect the rear brake pipe from the brake hose, then remove the retaining nut and retaining clip from the front of the rear brake hose.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    How should the new brake pipe be prepared for installation for the 2002 GMC Savana 3500? Posted by Customer
    A:
    Bend the new brake pipe for a proper fit and install it, ensuring a clearance of 19 mm (3/4 inch) from all moving or vibrating components before securing it with the fasteners.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done after connecting the brake pipe for the 2002 GMC Savana 3500? Posted by Customer
    A:
    Bleed the brake hydraulic system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the first step to replace the rear brake hose for the 2001 GMC Savana 3500? Posted by Customer
    A:
    First raise and support the vehicle, then clean all dirt and foreign material from the brake hose(s) and brake pipe fitting(s).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Flex Hose, Rear 19366771 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19366771 Flex Hose, Rear is available in the market under the name GM Brake Line, Hydraulic Hose. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19366771 Flex Hose, Rear fits certain Chevrolet Tahoe, Blazer, C1500 models, as well as GMC Yukon, C1500, C2500. Additionally, it is compatible with Cadillac Escalade models.
The original GM component designated by manufacturer part number 19366771 maintains top performance when functioning as the Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line unit at its Rear. The component 19366771 is constructed from durable material and its dimensions span 2.1 x 18.9 x 1.0 inches while weighing 0.60 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Hose, Hydraulic Brake. The part 19366771 has available replacement options 22113465, 94665587. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.