How to replace the brake fluid level sensor on 2002 Cadillac Eldorado?

In order to replace the brake fluid level sensor, disconnect the electrical connector and then loosen the tabs on the sensor with the needle nose pliers after which the sensor is removed out of the reservoir. To install, align the new sensor with the master cylinder reservoir, and press them together as well as reconnect the electrical connector.

OEM 2002 Cadillac Eldorado Brake Fluid Level Sensor

Brake Fluid Liquid Level Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Fluid Level Sensor found

View related parts
2002 Cadillac Eldorado Level Sensor Part Number: 18012741
$13.39 MSRP: $25.15
You Save: $11.76 (47%)
Product Specifications
- Other Name: Sensor, Brake Master Cylinder Reservoir; Brake Proportioning Valve; Level Indicator; Fluid Sensor; Brake Pressure Warning Switch; Pressure Metering Valve; Reservoir, Brake Master Cylinder
- Replaces: 18029973, 18043666, 18040246
- Item Weight: 0.30 Pounds
- Item Dimensions: 3.2 x 1.3 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 18012741
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Cadillac Eldorado Submodels:
- Base, ESC, ETC, Sport, Touring | 8 Cyl 4.6 L GAS, 8 Cyl 4.9 L GAS

2002 Cadillac Eldorado Brake Fluid Level Sensor

With a comprehensive array of OEM 2002 Cadillac Eldorado Brake Fluid Level Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 Cadillac Eldorado Brake Fluid Level Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2002 Cadillac Eldorado Brake Fluid Level Sensor Parts and Q&A

Q: How to replace the brake fluid level sensor on 2002 Cadillac Eldorado?
A: In order to replace the brake fluid level sensor, disconnect the electrical connector and then loosen the tabs on the sensor with the needle nose pliers after which the sensor is removed out of the reservoir. To install, align the new sensor with the master cylinder reservoir, and press them together as well as reconnect the electrical connector.