How to replace the right lash adjuster on 2002 Cadillac Seville?

To remove the right Lash Adjuster: remove the right valve rocker arms, and subsequently, pull out the stationary hydraulic lash adjusters (SHLA) from the bores. Clean and inspect the lash adjusters prior to installation. Talking about not stroking the stationary hydraulic Lash Adjuster plunger, it is vital not to do it without oil in the tight pressure chamber. Refill the shla with the clean engine oil gm p/n 12378006 or its equivalent while taking care not to scratch the pivot sphere area of shla. Finally, insert the new shla's into the bores and re-attaching the right valve rocker arms.

OEM 2002 Cadillac Seville Lash Adjuster

Lash Adjuster Lifter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Lash Adjuster found

View related parts
2002 Cadillac Seville Valve Lifters, Green Line
Part Number: 12686787
$14.06 MSRP: $23.17
You Save: $9.11 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Adjuster Assembly-Hydraulic Valve Lash; Filler Cap O-Ring; Adjuster, Engine Valve Lifter; Adjuster, Engine Valve
- Replaces: 12572638, 24100005
- Condition: New
- SKU: 12686787
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2002 Cadillac Seville Submodels:
- SLS, STS | 8 Cyl 4.6 L GAS

2002 Cadillac Seville Lash Adjuster

With a comprehensive array of OEM 2002 Cadillac Seville Lash Adjuster, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 Cadillac Seville Lash Adjuster are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2002 Cadillac Seville Parts Questions & Experts Answers

Q: How to replace the right lash adjuster on 2002 Cadillac Seville?
A: To remove the right Lash Adjuster: remove the right valve rocker arms, and subsequently, pull out the stationary hydraulic lash adjusters (SHLA) from the bores. Clean and inspect the lash adjusters prior to installation. Talking about not stroking the stationary hydraulic Lash Adjuster plunger, it is vital not to do it without oil in the tight pressure chamber. Refill the shla with the clean engine oil gm p/n 12378006 or its equivalent while taking care not to scratch the pivot sphere area of shla. Finally, insert the new shla's into the bores and re-attaching the right valve rocker arms.