What tools are required to replace the universal joint and slip yoke on 2002 Chevrolet Camaro?

To replace universal joint and slip yoke, use tools J 9522-3 and J 9522-5. Support the propeller shaft horizontally and do not clamp the shaft. Take the bottom bearing cap off with J 9522-3, and use J 9522-5 if necessary. Clean the yoke and install the bearing caps, making sure there is proper alignment and movement.

OEM 2002 Chevrolet Camaro Universal Joint

U-Joint

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Universal Joint found

View related parts
2002 Chevrolet Camaro Universal Joints Part Number: 23104840
$36.45 MSRP: $88.98
You Save: $52.53 (60%)
ADD TO CART
Product Specifications
- Other Name: Joint Kit, Propeller Shaft Universal Joint; U Joint
- Position: Front
- Replaces: 12471502, 12479126, 26042371
- Item Weight: 1.80 Pounds
- Item Dimensions: 5.9 x 5.4 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 23104840
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Camaro Submodels:
- Base, Berlinetta, Indianapolis 500 Pace Car, Iroc-Z, LT, RS, RS Heritage Edition, Sport, Z28, Z28 Heritage Edition, Z28 SS | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS

2002 Chevrolet Camaro Universal Joint

With a comprehensive array of OEM 2002 Chevrolet Camaro Universal Joint, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 Chevrolet Camaro Universal Joint are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2002 Chevrolet Camaro Universal Joint Parts and Q&A

Q: What tools are required to replace the universal joint and slip yoke on 2002 Chevrolet Camaro?
A: To replace universal joint and slip yoke, use tools J 9522-3 and J 9522-5. Support the propeller shaft horizontally and do not clamp the shaft. Take the bottom bearing cap off with J 9522-3, and use J 9522-5 if necessary. Clean the yoke and install the bearing caps, making sure there is proper alignment and movement.