How to replace the emblem/nameplate on the front fender on 2002 Chevrolet Corvette?

Before placing the new fender emblem you need to cover and tape the mounting area then use additional tape for precise placement. Apply the Heat Gun (J 25070) 152 mm (6 in) from the surface to heat the emblem/nameplate for 30 seconds while moving in a circular pattern. Avoid damage when you take off the panel surface emblem/nameplate with a plastic flat-tip tool. Before placing the component ensure to wipe clean the target area with a lint-free cloth followed by VMP naphtha or a 50/50 mix of isopropyl alcohol and water. Afterwards dry the surface thoroughly. When tagging the parts install the ZO6 emblem/nameplate as follows: place one end 216.5 mm (8.50 in) from the fender top, align the other end 212.74 mm (8.40 in) from the top and set the back 158.51 mm 6.24 in) from the rear fender edge. Heat the logo area with the Heat Gun (J25070) until it reaches 27-41°C (80-105°F) while keeping the emblem/nameplate near 29-32°C (85-90°F). Press the emblem/nameplate against the mounting area and peel off the protective liner from its back side without touching the sticky surface. Line up the part according to the reference points then push the item securely to the mount area with balanced force. Take off the protective tape from where the emblem will go.

OEM 2002 Chevrolet Corvette Emblem

Badge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Emblems found

View related parts
2002 Chevrolet Corvette Emblem Part Number: 19207384
$133.78 MSRP: $200.01
You Save: $66.23 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Emblem, Bumper/Fascia
- Position: Front
- Replaces: 10258164
- Item Weight: 0.50 Pounds
- Item Dimensions: 7.5 x 4.5 x 0.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19207384
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Corvette Submodels:
- Base, Indianapolis 500 Pace Car, Z06 | 8 Cyl 5.7 L GAS
View related parts
2002 Chevrolet Corvette Emblem, Rear Part Number: 19207385
$62.93 MSRP: $93.67
You Save: $30.74 (33%)
Product Specifications
- Other Name: Emblem, Rear End Panel And Tailgate; Emblem,Rear End Panel And Tailgate
- Position: Rear
- Replaces: 10258165
- Item Weight: 0.40 Pounds
- Item Dimensions: 7.4 x 5.5 x 0.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19207385
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Corvette Submodels:
- Base, Z06 | 8 Cyl 5.7 L GAS
View related parts
2002 Chevrolet Corvette Emblem, Front Part Number: 10314089
$54.98 MSRP: $81.83
You Save: $26.85 (33%)
Product Specifications
- Other Name: Emblem, Front Fender Name
- Position: Front
- Item Weight: 0.30 Pounds
- Item Dimensions: 6.4 x 1.5 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 10314089
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Corvette Submodels:
- 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Z06 | 8 Cyl 5.7 L GAS
View related parts
2002 Chevrolet Corvette Emblem, Front Part Number: 10429629
Product Specifications
- Other Name: Emblem, Front Fender Name
- Position: Front
- Item Weight: 0.30 Pounds
- Item Dimensions: 6.0 x 1.4 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 10429629
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Corvette Submodels:
- Base, Z06 | 8 Cyl 5.7 L GAS
View related parts
2002 Chevrolet Corvette Emblem Part Number: 10282774
Product Specifications
- Other Name: Emblem, Folding Top Compartment
- Item Weight: 0.40 Pounds
- Item Dimensions: 6.4 x 3.3 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10282774
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Corvette Submodels:
- Base, Indianapolis 500 Pace Car | 8 Cyl 5.7 L GAS
View related parts
2002 Chevrolet Corvette Emblem Part Number: 10291759
$5.34 MSRP: $7.95
You Save: $2.61 (33%)
Product Specifications
- Other Name: Emblem, Radio Auxiliary Speakers
- Position: Front
- Item Weight: 0.30 Pounds
- Item Dimensions: 2.3 x 1.7 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 10291759
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Corvette Submodels:
- 427, 427 Limited Edition Z06, 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Grand Sport, Indianapolis 500 Pace Car, Z06, Z06 Carbon, ZR1 | 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS

2002 Chevrolet Corvette Emblem

With a comprehensive array of OEM 2002 Chevrolet Corvette Emblem, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 Chevrolet Corvette Emblem are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2002 Chevrolet Corvette Emblem Parts and Q&A

Q: How to replace the emblem/nameplate on the front fender on 2002 Chevrolet Corvette?
A: Before placing the new fender emblem you need to cover and tape the mounting area then use additional tape for precise placement. Apply the Heat Gun (J 25070) 152 mm (6 in) from the surface to heat the emblem/nameplate for 30 seconds while moving in a circular pattern. Avoid damage when you take off the panel surface emblem/nameplate with a plastic flat-tip tool. Before placing the component ensure to wipe clean the target area with a lint-free cloth followed by VMP naphtha or a 50/50 mix of isopropyl alcohol and water. Afterwards dry the surface thoroughly. When tagging the parts install the ZO6 emblem/nameplate as follows: place one end 216.5 mm (8.50 in) from the fender top, align the other end 212.74 mm (8.40 in) from the top and set the back 158.51 mm 6.24 in) from the rear fender edge. Heat the logo area with the Heat Gun (J25070) until it reaches 27-41°C (80-105°F) while keeping the emblem/nameplate near 29-32°C (85-90°F). Press the emblem/nameplate against the mounting area and peel off the protective liner from its back side without touching the sticky surface. Line up the part according to the reference points then push the item securely to the mount area with balanced force. Take off the protective tape from where the emblem will go.