How to replace the rear crankshaft seal on 2002 Chevrolet Prizm?

Replace the crankshaft rear oil seal by first disconnect the negative Battery Cable and remove the transaxle assembly. With manual transmission, pull out the clutch and Pressure Plate and remove the Flywheel off the crankshaft. To avoid damaging the crankshaft, gently wrap the tip of the screw driver with tape and then use it to pry out the crankshaft rear oil seal. For installation, multi-purpose grease should be applied on the lip of the new crankshaft rear oil seal and it should be tapped in until the surface is flush with the crankshaft rear oil seal retainer edge. Lightly tap the crankshaft rear oil seal in with a hammer and then install the Flywheel, then the clutch and Pressure Plate if one is used and finally the transaxle assembly. After the bolts are removed, connect the negative Battery Cable and tighten the bolt down to 15 nm (11 ft. Lbs.).

OEM 2002 Chevrolet Prizm Crankshaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Crankshaft Seals found

View related parts
2002 Chevrolet Prizm Rear Main Seal
Part Number: 19205488
Product Specifications
- Other Name: Seal, Engine Rear Main Bearing; Crankshaft Seal
- Position: Rear
- Replaces: 94856962
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.5 x 4.4 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19205488
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Prizm Submodels:
- Base, LSi | 4 Cyl 1.8 L GAS
View related parts
2002 Chevrolet Prizm Crankshaft Seal
Part Number: 94858992
Product Specifications
- Other Name: Seal, Engine Front Cover & Crankshaft Seal; Timing Cover Gasket; Timing Cover Seal; Front Cover Seal; Seal
- Position: Front
- Item Weight: 0.30 Pounds
- Item Dimensions: 2.0 x 2.0 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 94858992
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Prizm Submodels:
- Base, LSi | 4 Cyl 1.8 L GAS

2002 Chevrolet Prizm Crankshaft Seal

With a comprehensive array of OEM 2002 Chevrolet Prizm Crankshaft Seal, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 Chevrolet Prizm Crankshaft Seal are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2002 Chevrolet Prizm Parts Questions & Experts Answers

Q: How to replace the rear crankshaft seal on 2002 Chevrolet Prizm?
A: Replace the crankshaft rear oil seal by first disconnect the negative Battery Cable and remove the transaxle assembly. With manual transmission, pull out the clutch and Pressure Plate and remove the Flywheel off the crankshaft. To avoid damaging the crankshaft, gently wrap the tip of the screw driver with tape and then use it to pry out the crankshaft rear oil seal. For installation, multi-purpose grease should be applied on the lip of the new crankshaft rear oil seal and it should be tapped in until the surface is flush with the crankshaft rear oil seal retainer edge. Lightly tap the crankshaft rear oil seal in with a hammer and then install the Flywheel, then the clutch and Pressure Plate if one is used and finally the transaxle assembly. After the bolts are removed, connect the negative Battery Cable and tighten the bolt down to 15 nm (11 ft. Lbs.).