How to Replace the Brake Light Switch in a Torque Converter Clutch/Cruise Control System on 2003 Buick LeSabre?

Before starting torque converter clutch/cruise control release switch replacement one must remove the left closeout insulator panel. The upper switch needs its counter-clockwise rotation to detach so you can disconnect its upper electrical connector. Following installation procedures requires the Brake Pedal to stay in its maximum up position or at rest. Attach the power connector to the upper switch then insert it into the upper retainer then rotate it clockwise until full insertion takes place. When the procedure is complete, reattach the left closeout insulator panel.

OEM 2003 Buick LeSabre Brake Light Switch

Brake Lamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Light Switch found

View related parts
2003 Buick LeSabre Brake Switch
Part Number: 25668878
$13.26 MSRP: $20.75
You Save: $7.49 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Stop Lamp Switch; Brake Light Switch; Release Switch; Stoplamp Switch; Switch; Switch, Transmission Safety Start/Warning; Switch, Cruise Control
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.1 x 2.2 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25668878
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Buick LeSabre Submodels:
- Custom, Limited | 6 Cyl 3.8 L GAS

2003 Buick LeSabre Brake Light Switch

With a comprehensive array of OEM 2003 Buick LeSabre Brake Light Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2003 Buick LeSabre Brake Light Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2003 Buick LeSabre Parts Questions & Experts Answers

Q: How to Replace the Brake Light Switch in a Torque Converter Clutch/Cruise Control System on 2003 Buick LeSabre?
A: Before starting torque converter clutch/cruise control release switch replacement one must remove the left closeout insulator panel. The upper switch needs its counter-clockwise rotation to detach so you can disconnect its upper electrical connector. Following installation procedures requires the Brake Pedal to stay in its maximum up position or at rest. Attach the power connector to the upper switch then insert it into the upper retainer then rotate it clockwise until full insertion takes place. When the procedure is complete, reattach the left closeout insulator panel.