How to replace or repair the grille emblem on 2003 Buick Regal?

Before working on the grille emblem of a Regal you should cover the mounting surface with tape then use tape to make installation references. Use the J 25070 Heat Gun (J 25070) to apply round heat for 30 seconds over the emblem/nameplate. Use a flat plastic tool to take off the emblem/nameplate from its panel location without harming the paint. When removing body panel adhesive use a 3M(TM) Scotch Brite molding adhesive remover disk (3M(TM) P/N 07502) while plastic panels need a lint-free cloth with VMP naphtha or a combination of 50% isopropyl alcohol and water. Maintain a clean workspace free of dust before putting on the new sign to enhance its bond. Wipe the installation space with a lint-free cloth that carries the same cleaning solution until it becomes completely dry. Set the installation space to 27-41°C (80-105°F) temperature and the new part to 29-32°C (85-90°F). Mark placement with tape before applying the warm surface to the emblem/nameplate. Place the emblem/nameplate onto its designated spot by lining up the marks on both the surface and the emblem/nameplate. After that put equal stress on all parts to build a strong bond. Take off the protective tape from the adhesion area.

OEM 2003 Buick Regal Emblem

Badge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Emblems found

View related parts
2003 Buick Regal Emblem, Front
Part Number: 10273068
Product Specifications
- Other Name: Emblem, Radiator Grille And Front End Ornamentation
- Position: Front
- Item Weight: 0.30 Pounds
- Item Dimensions: 3.8 x 3.6 x 0.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10273068
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Buick Regal Submodels:
- 25th Anniversary Edition, GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
View related parts
2003 Buick Regal Emblem, Rear
Part Number: 25602037
Product Specifications
- Other Name: Plate Assembly-Rear Compartment Lid Name; Nameplate; Plate,Rear End Panel And Tailgate
- Position: Rear
- Item Weight: 0.30 Pounds
- Item Dimensions: 6.4 x 1.1 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25602037
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Buick Regal Submodels:
- GS, GSE | 6 Cyl 3.8 L GAS
View related parts
2003 Buick Regal Emblem, Rear
Part Number: 10316010
Product Specifications
- Other Name: Plate, Rear Compartment Lid, Rear End Panel And Tailgate; Nameplate; Plate,Rear End Panel And Tailgate
- Position: Rear
- Item Weight: 0.30 Pounds
- Item Dimensions: 7.0 x 4.8 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10316010
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Buick Regal Submodels:
- GS, LS | 6 Cyl 3.8 L GAS
View related parts
2003 Buick Regal Emblem, Front
Part Number: 10446599
Product Specifications
- Other Name: Emblem, Radiator Grille And Front End Ornamentation
- Position: Front
- Item Weight: 0.30 Pounds
- Item Dimensions: 3.9 x 3.9 x 0.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10446599
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Buick Regal Submodels:
- GS, LS | 6 Cyl 3.8 L GAS
View related parts
2003 Buick Regal Emblem, Rear
Part Number: 10303379
Product Specifications
- Other Name: Emblem, Rear Compartment Lid, Rear End Panel And Tailgate; Plate,Rear End Panel And Tailgate
- Position: Rear
- Item Weight: 0.30 Pounds
- Item Dimensions: 3.1 x 2.2 x 0.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10303379
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Buick Regal Submodels:
- GS, LS | 6 Cyl 3.8 L GAS

2003 Buick Regal Emblem

With a comprehensive array of OEM 2003 Buick Regal Emblem, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2003 Buick Regal Emblem are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2003 Buick Regal Emblem Parts Questions & Experts Answers

Q: How to replace or repair the grille emblem on 2003 Buick Regal?
A: Before working on the grille emblem of a Regal you should cover the mounting surface with tape then use tape to make installation references. Use the J 25070 Heat Gun (J 25070) to apply round heat for 30 seconds over the emblem/nameplate. Use a flat plastic tool to take off the emblem/nameplate from its panel location without harming the paint. When removing body panel adhesive use a 3M(TM) Scotch Brite molding adhesive remover disk (3M(TM) P/N 07502) while plastic panels need a lint-free cloth with VMP naphtha or a combination of 50% isopropyl alcohol and water. Maintain a clean workspace free of dust before putting on the new sign to enhance its bond. Wipe the installation space with a lint-free cloth that carries the same cleaning solution until it becomes completely dry. Set the installation space to 27-41°C (80-105°F) temperature and the new part to 29-32°C (85-90°F). Mark placement with tape before applying the warm surface to the emblem/nameplate. Place the emblem/nameplate onto its designated spot by lining up the marks on both the surface and the emblem/nameplate. After that put equal stress on all parts to build a strong bond. Take off the protective tape from the adhesion area.