Other Name: Ornament, Radiator Grille And Front End Ornamentation
Position: Front
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1988 Buick Regal | Custom, Limited | 6 Cyl 2.8 L GAS
| Page 1 of 3 |Next >
1-20 of 48 Results
Buick Regal Emblem
Our website offers an extensive catalog of genuine Buick Regal Emblem at unbeatable prices. Every OEM Buick Regal Emblem comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Buick Regal Emblem Parts Questions & Experts Answers
Q: How to replace or repair the emblem/nameplate on the rear fascia on Buick Regal?
A: Before you install new parts for the Buick rear fascia you must set up tape to protect the panel surface and line up the placement through tape markers. Apply a J 25070 Heat Gun's circular heat motion for 30 seconds on the emblem/nameplate. A plastic and flat tool lets you detach the emblem/nameplate slowly from the panel without causing paint damage. The body panel needs a 3M(TM) Scotch-Brite molding adhesive remover disk (part 07502) while plastic panels require VMP naphtha or a 50/50 water-isopropyl alcohol solution smeared on a lint-free cloth for the removal task. After you clean the space use the same approach to prepare it for application. First place tape at the installation spot. Heat the surface to 80 to 105 degrees Fahrenheit while setting the emblem/nameplate temperature range between 85 and 90 degrees Fahrenheit. Fit the emblem/nameplate exactly into the recess where you should push evenly across both the surface and emblem/nameplate before finally removing the protective tape.