How to Address Issues with the Trunk Latch on Buick Regal?

To install the new rear compartment lid latch you need to open the compartment and trace the latch position on the top. Unplug the connectors both from the rear compartment lid latch and the lock cylinder actuator cable. Pull off the nuts which support the rear compartment lid latch to its base and free it from the lid. Place the new rear compartment lid latch on the marked spots of the rear compartment lid and use two nuts to secure it while tightening them to 10 N.m (89 lb in). Secure both power cords to the lock cylinder after you put back the trunk lid compartment.

How to replace the rear compartment trunk latch on Buick Regal?

You need to open the rear compartment to mark the position of the existing latch with a grease pencil on the rear compartment lid. Detach electrical connectors from both the latch and cable connections at the lock cylinder. Take off the nuts holding the latch to the lid and detach the latch. After setting the new latch over the alignment marks place the nuts and tighten them to 10 N.m force (89 pound inch torque). Plug back in both cables and then complete the process by closing the rear compartment.

OEM Buick Regal Trunk Latch

Rear Trunk Latch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Trunk Latches found

View related parts
Buick Regal Door Jamb Switch Part Number: 25664288
$85.37 MSRP: $128.76
You Save: $43.39 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Actuator Kit, Door Lock; Trunk Lock Actuator Motor; Door Lock Actuator; Lock Actuator; Electric and Vacuum Door Locks; End Gate Electrical Actuator Kit.
- Position: Rear
- Replaces: 16627973, 25664020, 16632015, 16636561, 22144363, 3635350
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2004 Buick Regal | 25th Anniversary Edition, Custom, Gran Sport, GS, GSE, Limited, LS, LSE, Olympic Gold Edition | 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
View related parts
Buick Regal Lock Cylinder Part Number: 12330124
$13.11 MSRP: $18.75
You Save: $5.64 (31%)
ADD TO CART
Product Specifications
- Other Name: Lock Svc P; Lock
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1987-1991 Buick Regal | Base, Custom, GNX, Gran Sport, Grand National, Limited | 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.0 L GAS
View related parts
Buick Regal Lock, Rear Part Number: 10445387
$298.95 MSRP: $408.48
You Save: $109.53 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch, Rear Compartment Lid Or Tail Gate Latch; Trunk Latch; Door Lock; Latch; Latch, Rear Compartment Lid Release Or Ajar
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004 Buick Regal | GS, LS | 6 Cyl 3.8 L GAS
View related parts
Buick Regal Lock, Rear Passenger Side Part Number: 16636578
$91.52 MSRP: $132.09
You Save: $40.57 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch Sub Assembly-Rear Door Service None; Door Lock Actuator Motor; Door Latch Assembly; Trunk Latch; Door Lock; Latch; Latch, Rear Compartment Lid Or Tail Gate Latch; Latch, Rear Side Door
- Position: Rear Passenger Side
- Replaces: 16629716
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2004 Buick Regal | 25th Anniversary Edition, GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
View related parts
Buick Regal Lock Actuator, Rear Part Number: 13513995
$118.87 MSRP: $173.07
You Save: $54.20 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch, Rear Compartment Lid Or Tail Gate Latch; Trunk Latch; Door Lock; Lock; Latch, Rear Compartment Lid Release Or Ajar; Rear Storage Compartment; Rear Hatch Window; Lift Gate
- Position: Rear
- Replaces: 13501988
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2017 Buick Regal | Base, CXL, GS, Premium, Sport Touring | 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV)
View related parts
Buick Regal Lock, Rear Driver Side Part Number: 16636579
Product Specifications
- Other Name: Latch Sub Assembly-Rear Door Service None; Door Lock Actuator Motor; Door Latch Assembly; Trunk Latch; Door Lock; Latch; Latch, Rear Compartment Lid Or Tail Gate Latch; Latch, Rear Side Door
- Position: Rear Driver Side
- Replaces: 16629717
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2004 Buick Regal | 25th Anniversary Edition, GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
View related parts
Buick Regal Lock Cylinder, Black, Rear Part Number: 20513755
$35.28 MSRP: $52.51
You Save: $17.23 (33%)
Product Specifications
- Other Name: Lock, Rear Compartment Lid Or Tail Gate Latch; Trunk Lock Assembly; Rear Compartment Lid Latch; Tail Gate Latch; Ajar Release Latch.
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-2003 Buick Regal | 25th Anniversary Edition, Custom, Gran Sport, GS, GSE, Limited, LS, LSE, Olympic Gold Edition | 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
View related parts
Buick Regal Lock, Rear Part Number: 20513752
$57.21 MSRP: $85.15
You Save: $27.94 (33%)
Product Specifications
- Other Name: Lock, Rear Compartment Lid Or Tail Gate Latch; Trunk Latch; Door Lock; Latch; Rear Compartment Lid or Tail Gate Release Ajar
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2003 Buick Regal | 25th Anniversary Edition, GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
View related parts
Buick Regal Crankshaft Position Sensor, Rear Part Number: 25717076
Product Specifications
- Other Name: Latch, Rear Compartment Lid Or Tail Gate Latch; Power Steering Pump; Trunk Latch; Flex Hose; Manifold Gasket; Vapor Canister; Lock Assembly; Intermediate Pipe; Rear Flex Hose; Latch, Rear Lid Release
- Position: Rear
- Replaces: 25696865, 25707328
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992 Buick Regal | Custom, Gran Sport, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick Regal Lock, Rear Part Number: 20616582
Product Specifications
- Other Name: Lock Assembly, Rear Compartment Lid Or Tail Gate Latch; Trunk Latch; Door Lock; Lock, Rear Compartment Lid Or Tail Gate Latch; Lock, Rear Compartment Lid
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1987 Buick Regal | Base, GNX, Grand National, Limited, T-Type | 6 Cyl 3.8 L GAS, 6 Cyl 4.1 L GAS, 6 Cyl 4.3 L DIESEL, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL

Buick Regal Trunk Latch

Want to cut long-term maintenance and repair costs? Choose OEM Trunk Latch. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Buick Regal parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Buick Regal Trunk Latch includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Trunk Latch is one of the crucial car parts that represent the reliability and performance of Buick car brand. A Trunk Latch is intended to specifically lock the trunk lid in different models of Buick Regal, and keep your personal items protected from theft or unfavorable conditions. Made from stainless steel, it has high endurance when it comes to weather influences, both- wind and potentially destructive attempts on the luggage. The lock cylinder in combination with key mechanism gives extra security to the vehicle that is why Buick Regal owners trust it. The Buick Regal has been manufactured throughout the years and with it, the awareness of needing a highly effective and secure Trunk Latch system to provide added support and safety for people on the road. Support of the Trunk Latch with different types of vehicles such as the liftback sedan and the TourX station wagon consolidates the product's flexibility. Additional characteristics, endurance to rust as well as wear reveal that this component will perform its function as expected for a long time; evidently, Buick does not take quality for granted. The Buick Regal is still a luxury car with appealing performance attributes to represent; besides, the Trunk Latch will become an essential component and a distinguishing sign in the automobile industry. It is possible to conclude that the Trunk Latch contributes profoundly to the model's security, durability, and compatibility and serves as a reminder of the brand's adherence to the principles of quality.

Buick Regal Trunk Latch Parts and Q&A

Lock Cylinder, Black, Rear
20513755
Q: How to Address Issues with the Trunk Latch on Buick Regal?
A:
To install the new rear compartment lid latch you need to open the compartment and trace the latch position on the top. Unplug the connectors both from the rear compartment lid latch and the lock cylinder actuator cable. Pull off the nuts which support the rear compartment lid latch to its base and free it from the lid. Place the new rear compartment lid latch on the marked spots of the rear compartment lid and use two nuts to secure it while tightening them to 10 N.m (89 lb in). Secure both power cords to the lock cylinder after you put back the trunk lid compartment.
Door Jamb Switch
25664288
Q: How to replace the rear compartment trunk latch on Buick Regal?
A:
You need to open the rear compartment to mark the position of the existing latch with a grease pencil on the rear compartment lid. Detach electrical connectors from both the latch and cable connections at the lock cylinder. Take off the nuts holding the latch to the lid and detach the latch. After setting the new latch over the alignment marks place the nuts and tighten them to 10 N.m force (89 pound inch torque). Plug back in both cables and then complete the process by closing the rear compartment.