Make sure this part fits

GM 20513752
Lock, Rear

1992-2003 GM

Customer Questions & Expert Answers (12)
GM 20513752 Lock, Rear
GM 20513752 Lock, Rear
  • Part Description
    Lock, Rear Compartment Lid Or Tail Gate Latch; Trunk Latch; Door Lock
  • Position
    Rear
  • Manufacturer
    General Motors
Make sure this part fits
$57.21 MSRP: $85.15
You Save: $27.94 (33%)
Currently Unavailable

Due to manufacturer supply shortage, this item isn't currently available for ordering.

  • Vehicle Fitment

    Year Make Model Trim Engine
    1997-2000 Buick CenturyCustom, Limited6 Cyl 3.1 L GAS
    1997-2001 Buick Park AvenueBase, Ultra6 Cyl 3.8 L GAS
    1998-2003 Buick Regal25th Anniversary Edition, GS, GSE, LS, LSE6 Cyl 3.8 L GAS
    1995 Buick RivieraBase6 Cyl 3.8 L GAS
    1992-2002 Cadillac EldoradoBase, ESC, ETC, Sport, Touring8 Cyl 4.6 L GAS, 8 Cyl 4.9 L GAS
    1995-2001 Chevrolet CavalierBase, LS, RS, Z244 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS
    2000 Chevrolet Monte CarloLS, SS6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 20513752 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 20513752 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the final step in the process for the 2001 Buick Park Avenue? Posted by Customer
    A:
    Reinstall the rear compartment lid trim.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Trunk Latch
    Q:
    What is the first step to replace the front door lock actuator for the 2002 Buick Regal? Posted by Customer
    A:
    Remove the front door lock.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be done after marking the latch's location for the 2001 Buick Regal? Posted by Customer
    A:
    Disconnect the electrical connectors from the rear compartment lid latch and the lock cylinder actuator cable from the lock cylinder.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Trunk Latch
    Q:
    What should be done after removing the rear door lock for the 2000 Buick Regal? Posted by Customer
    A:
    Take out the screws securing the rear door lock to the rear door lock actuator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the first step to replace the rear compartment lid latch for the 2000 Buick Regal? Posted by Customer
    A:
    Open the rear compartment and remove the release actuator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Trunk Latch
    Q:
    What should be done after removing the screws for the 2002 Buick Regal? Posted by Customer
    A:
    Disconnect the electrical connectors and take out the inside handle rods from the lock.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock
    Q:
    What is the next step after placing the new actuator onto the lock assembly for the 2000 Cadillac Eldorado? Posted by Customer
    A:
    Verify that the actuating arm rubber bumper is on the actuating arm.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be done after installing the actuating arm and the bumper for the 2001 Cadillac Eldorado? Posted by Customer
    A:
    Align the lock switch teeth with the gear tooth fork bolt and the fastener holes.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What additional step is needed for the 2000 Chevrolet Cavalier during installation? Posted by Customer
    A:
    If applicable for Pontiac models, install the lock cylinder rivets before finally installing the latch cable assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Trunk Latch
    Q:
    How do you install the latch assembly for the 2001 Chevrolet Cavalier? Posted by Customer
    A:
    Position the latch assembly according to the alignment marks and install the latch assembly bolts, tightening them to 6 N.m (53 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Trunk Latch
    Q:
    What is the first step to replace the front side door lock actuator for the 2000 Buick Regal? Posted by Customer
    A:
    Remove the front door lock.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Lock, Rear 20513752 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 20513752 Lock, Rear is available in the market under the name GM Door Lock, Door Lock Actuator, Tailgate Latch, Tailgate Lock, Trunk Latch. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 20513752 Lock, Rear fits certain Chevrolet Cavalier, Monte Carlo models, as well as Cadillac Eldorado. Additionally, it is compatible with Buick Regal, Riviera, Century models.
The original GM component designated by manufacturer part number 20513752 maintains top performance when functioning as the Lock, Rear Compartment Lid Or Tail Gate Latch; Trunk Latch; Door Lock unit at its Rear. The component 20513752 is constructed from durable material and its dimensions span 6.4 x 3.3 x 3.1 inches while weighing 0.70 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Latch; Rear Compartment Lid or Tail Gate Release Ajar. The part 20513752 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.