Other Name: Actuator Assembly-Lift Gate Power Assist; Back Glass Lift Support; Door Lock Actuator; Lift Support.; Actuator; Actuator, Rear Compartment Lid Release Or Ajar
Position: Driver Side
Replaces: 39085565
Fits the following Buick Models:
Regal TourX | 2018-2020 | Base, Essence, Preferred | 4 Cyl 2.0 L GAS
Other Name: Lock, Rear Compartment Lid Or Tail Gate Latch; Door Lock; Lock
Position: Rear
Fits the following Buick Models:
Century | 1984-1996 | Custom, Estate Wagon, Limited, Special | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L DIESEL
Skyhawk | 1984-1989 | Custom, Limited, SE, Sport, T-Type | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS
Other Name: Lock, Rear Compartment Lid Or Tail Gate Latch; Trunk Latch; Door Lock; Latch; Lock, Rear Compartment Or Tailgate Lock Cylinder; Latch, Rear Compartment Lid Or Tail Gate Latch
Other Name: Latch Sub Assembly-Rear Door Service None; Door Lock Actuator Motor; Door Latch Assembly; Trunk Latch; Door Lock; Latch; Latch, Rear Compartment Lid Or Tail Gate Latch; Latch, Rear Side Door
Position: Rear Driver Side
Replaces: 16629717
Fits the following Buick Models:
Century | 1997-2005 | Custom, Limited, Special Edition | 6 Cyl 3.1 L GAS
Regal | 1997-2004 | 25th Anniversary Edition, GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
Other Name: Latch, Rear Compartment Lid Or Tail Gate Latch; Trunk Latch; Door Lock; Latch; Latch, Rear Compartment Lid Release Or Ajar; Latch, Rear Compartment Lid
Position: Rear
Replaces: 25726745
Fits the following Buick Models:
LeSabre | 2002-2005 | Custom, Limited | 6 Cyl 3.8 L GAS
Other Name: Actuator, Rear Compartment Lid Release; Tailgate Lock Motor; Trunk Lock Motor; Door Lock Motor.; Striker Actuator; Actuator
Position: Rear
Fits the following Buick Models:
Century | 1984-1996 | Custom, Estate Wagon, Limited, Special | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L DIESEL
Other Name: Lock Assembly, Rear Compartment Lid Or Tail Gate Latch; Trunk Latch; Door Lock; Lock, Rear Compartment Lid Or Tail Gate Latch; Lock, Rear Compartment Lid
Position: Rear
Fits the following Buick Models:
Electra | 1989, 1984-1987 | Estate Wagon, Limited, Park Avenue | 6 Cyl 4.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
LeSabre | 1984-1990 | Collector's Edition, Custom, Estate Wagon, Limited | 6 Cyl 3.8 L GAS, 6 Cyl 4.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
Regal | 1984-1987 | Base, GNX, Grand National, Limited, T-Type | 6 Cyl 3.8 L GAS, 6 Cyl 4.1 L GAS, 6 Cyl 4.3 L DIESEL, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
Skylark | 1984-1985 | Custom, Limited, T-Type | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS
Other Name: Lock, Rear Compartment Lid Or Tail Gate Latch; Door Lock; Lock; Lock, Rear Compartment Or Tail Gate Lock
Position: Rear
Fits the following Buick Models:
Century | 1984-1996 | Custom, Estate Wagon, Limited, Special | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L DIESEL
Q: How to replace the rear trunk latch without an interior release handle on Buick LeSabre?
A: Start replacing the Trunk Latch by taking off the connectors from the Trunk Latch assembly, and then pull the latch cable free from the lock cylinder. After that, unscrew the fasteners that attach the Trunk Latch assembly and remove the assembly. Start by putting in the Trunk Latch assembly and closely read the fastener notice in the service precautions. Join the fasteners to the Trunk Latch assembly, tighten them to 9 n.m or 80 lb in, fit the latch cable to the lock cylinder, and link up the electrical connectors to the Trunk Latch.
Q: How to Service and Repair the Trunk Latch on Buick LaCrosse?
A: Open the back compartment to take out its carpet before you begin working. Use a grease pencil to mark the placement of the rear compartment lid latch on the lid surface before disconnecting its electrical connectors and actuator cable. Prevent the roof from opening by removing nuts that secure the back compartment door latch. Afterward, take out the latch. You should mount the new rear compartment lid latch to its proper alignment marks before adding and tightening nuts at 10 N.m (89 lb in). Rejoin all electrical parts and the lock cable before restoring the carpet in the back space and shutting the compartment.
Q: How to Address Issues with the Trunk Latch on Buick Regal?
A: To install the new rear compartment lid latch you need to open the compartment and trace the latch position on the top. Unplug the connectors both from the rear compartment lid latch and the lock cylinder actuator cable. Pull off the nuts which support the rear compartment lid latch to its base and free it from the lid. Place the new rear compartment lid latch on the marked spots of the rear compartment lid and use two nuts to secure it while tightening them to 10 N.m (89 lb in). Secure both power cords to the lock cylinder after you put back the trunk lid compartment.