Q: How to service and repair the Trunk Lock Cylinder on Buick Century?
A: You must start by opening the rear compartment then pulling out the retainer from the rear compartment lock cylinder to take it out. Then remove the rear compartment lock cylinder actuator cable from the lock cylinder and retrieve both components as well as the gasket from the rear compartment lid. Install the new lock cylinder and gasket onto the rear compartment lid before pressing the retainer onto the lock cylinder. Finish installation by joining the actuator cable to the lock cylinder followed by closing the rear compartment lid.
Q: How to Change the Trunk Lock Cylinder on a Buick Regal?
A: You should open the rear compartment space to start replacing the lock cylinder. Pull the retainer off of the rear compartment lock cylinder before disconnecting the actuator cable from it. You should pull out the lock cylinder system together with its gasket from the rear compartment. Push the retainer onto the lock cylinder before placing the gasket and lock cylinder into the rear compartment lid. Finally, close the rear compartment.
Q: How to replace the Trunk Lock Cylinder in the rear compartment lid on Buick LeSabre?
A: To install the new lock cylinder in the rear compartment lid you must first take out the tail lamp before disconnecting the latch cable from the old lock cylinder. Remove the lock cylinder from the rear compartment lid by taking out its three fasteners. Reposition the lock cylinder onto the lid space and maintain a safe distance from the fastener notice during installation. Attach the lock cylinder to the lid by using three fasteners and tightening them to 80 lb in (9 N.m). Reattach the lock cable to the cylinder before putting back the back up lamp assembly.