Q: How to service and repair the Windshield Washer Pump on Buick Century?
A: Start your work on the Windshield Washer Pump by taking out the front fender liner. Take off the washer pump from the washer solvent container by first pulling the top from the side and then pulling the pump out completely. Afterwards disconnect the electrical connector and the hose from the washer pump. You need to take out the washer pump grommet from the washer solvent container. Insert the washer pump grommet into the washer solvent container before pushing the washer pump wholly into the container from the inlet end and snapping the top into place on the container side. Reattach the electrical wires and hose to the washer pump before putting back the front fender panel.
Q: How to replace the Windshield Washer Pump on Buick LeSabre?
A: Start re-replacement by emptying the washer solvent tank. Unblock the fascia extension from the right side and disconnect the wash hose plus electronics at the washer pump base. As a next step take the washer pump out of the washer solvent container. Begin by placing the new washer pump into the washer solvent storage area before connecting the electrical and washer hose connections to it. Reattach the right front fascia part and complete the washer solvent tank.
Q: How to replace the Windshield Washer Pump on Buick Regal?
A: You should take off the front tender liner before replacing the windshield washer pump. Take the washer pump out of the washer solvent container. First detach both the electrical harness and hose from the washer pump before sliding the top unit away from the side to remove the entire pump. Extract the washer pump seal from the container with its washer fluid. Start the procedure by placing the new washer pump seal into the washer solvent container then insert the washer pump from the top first into the side before ending with the inlet. Insert the electrical part and hose back into the washer pump while placing the front fender liner back in its proper position.