Other Name: Latch Sub Assembly-Rear Door Service None; Door Lock Actuator Motor; Door Latch Assembly; Trunk Latch; Door Lock; Latch; Latch, Rear Compartment Lid Or Tail Gate Latch; Latch, Rear Side Door
Position: Rear Driver Side
Replaces: 16629717
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1997-2004 Buick Regal | 25th Anniversary Edition, GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
Other Name: Lock Assembly, Rear Compartment Lid Or Tail Gate Latch; Trunk Latch; Door Lock; Lock, Rear Compartment Lid Or Tail Gate Latch; Lock, Rear Compartment Lid
Position: Rear
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1984-1987 Buick Regal | Base, GNX, Grand National, Limited, T-Type | 6 Cyl 3.8 L GAS, 6 Cyl 4.1 L GAS, 6 Cyl 4.3 L DIESEL, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
Other Name: Actuator, Door Electric And Vacuum Locks; Door Lock Actuator Motor; Door Lock Actuator; Power Actuator; Latch Actuator; Lock Solenoid; Lock; Actuator; Actuator, Door And End Gate Electrical
Position: Front
Replaces: 22020256, 22049686
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1984-1992 Buick Regal | Base, Custom, GNX, Gran Sport, Grand National, Limited, T-Type | 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.1 L GAS, 6 Cyl 4.3 L DIESEL, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
Other Name: Lock Kit, Rear Side Door; Door Latch Assembly; Door Lock; Lock
Position: Rear Passenger Side
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1994 Buick Regal | Custom, Gran Sport, Limited | 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
| Page 1 of 3 |Next >
1-20 of 52 Results
Buick Regal Door Lock
Our website offers an extensive catalog of genuine Buick Regal Door Lock at unbeatable prices. Every OEM Buick Regal Door Lock comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Buick Regal Door Lock Parts Questions & Experts Answers
Q: How to replace the front door lock on Buick Regal?
A: The front door lock replacement process begins by removing the trim panel together with the water deflector. You must first disconnect the inside handle rods from the handle before removing their attaching clip that fixes them to the door. Side cutters can remove the outside handle rod-to-lock clip from the lock before you discard it and unscrew the remaining clip portion. The installation starts with removing screws (1, 2, 3) which hold the lock to the door followed by disconnecting electricity wires before taking out inside handle rods from within the lock. When installing place the inside hand rods on the door lock then insert the door lock through the inner panel access hole. Apply Locktite(R) Blue GM P/N 12345382 or Canadian P/N 10953489 or equivalent solution onto the electrical connectors before assembling the door lock screws by tightening them to 10 N.m (89 lb in) in the correct sequence starting with top, bottom, middle, 1, 2, 3. Fasten a fresh outside handle rod-to-lock clip at the door lock lever before inserting the external rod to ensure no slack occurs while securing the clip cover on the threaded rod. First mount the clip onto the inside handle rods before you attach the internal rods to the handle unit. The installation process ends with water deflector and trim panel replacement.