Other Name: Hinge Assembly-Rear Compartment Lid; Hinge, Rear Compartment Lid And End Gate
Position: Rear
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1991-1996 Buick Regal | Custom, Gran Sport, Limited, Olympic Gold Edition | 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
Buick Regal Liftgate Hinge
Our website offers an extensive catalog of genuine Buick Regal Liftgate Hinge at unbeatable prices. Every OEM Buick Regal Liftgate Hinge comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Buick Regal Liftgate Hinge Parts Questions & Experts Answers
Q: How to replace the rear liftgate hinge on Buick Regal?
A: To start the job open the rear compartment then trace the hinge spot on the lid with a greasy marker for installation. Take off both rear compartment hinge to lid nuts by disconnecting the lid harness in the compartment. You should take out the support struts from the rear compartment for this task. Trace the hinge position on the quarter panel with a grease pencil before disconnecting bolts that hold it in place against the back quarter. To set the hinge in place line up the mark you made on the quarter panel earlier and fasten the bolts to secure the hinge to the rear part, tighten the bolts to 25 Nm (18 lb ft). Put back the rear compartment struts before tightening the rear compartment lid nuts. Use both hand movement and an Allen wrench to change the rear compartment lid height through its bumpers while adjusting the rear compartment hinge.