Make sure this part fits

GM 22062740
Lock Actuator

1984-2005 GM

Customer Questions & Expert Answers (21)
GM 22062740 Lock Actuator
  • Part Description
    Actuator, Door Electric And Vacuum Locks; Door Lock Actuator Motor; Door Lock Actuator
  • Position
    Front
  • Replaces
    22020256, 22049686
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number22062740
    Part DescriptionActuator, Door Electric And Vacuum Locks; Door Lock Actuator Motor; Door Lock Actuator
    Other NamesPower Actuator; Latch Actuator; Lock Solenoid; Lock; Actuator; Actuator, Door And End Gate Electrical
    Item Dimensions7.4 x 3.9 x 2.7 inches
    Item Weight0.90 Pounds
    PositionFront
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces22020256, 22049686
    ManufacturerGeneral Motors
    SKU22062740
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    1984-1996 Buick CenturyCustom, Estate Wagon, Limited, Special, T-Type4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L DIESEL
    1984-1990 Buick ElectraEstate Wagon, Limited, Park Avenue, Park Avenue Ultra, T-Type6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.1 L GAS, 6 Cyl 4.3 L DIESEL, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
    1984-1990 Buick LeSabreBase, Collector's Edition, Custom, Estate Wagon, Limited, T-Type6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
    1988-1991 Buick ReattaBase6 Cyl 3.8 L GAS
    1984-1992 Buick RegalBase, Custom, GNX, Gran Sport, Grand National, Limited, T-Type6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.1 L GAS, 6 Cyl 4.3 L DIESEL, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
    1984-1993 Buick RivieraBase, Luxury, T-Type6 Cyl 3.8 L GAS, 6 Cyl 4.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
    1984-1989 Buick SkyhawkCustom, Limited, SE, Sport, T-Type4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS
    1984-1991 Buick SkylarkBase, Custom, Gran Sport, Limited, Luxury Edition, T-Type4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS
    1986-1987 Buick SomersetCustom, Limited, T-Type4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
    1985 Buick Somerset RegalBase, Limited4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
    View More
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 22062740 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 22062740 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after installing the clips to the remote lock for the 2000 Chevrolet Astro? Posted by Customer
    A:
    Install the lower latch and rod to the door, followed by the reinforcement.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What tool is needed to remove the actuator to door rivets for the 2005 Chevrolet Astro? Posted by Customer
    A:
    Utilize a 6 mm (1/4 in) drill bit.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be removed along with the control latch for the 2000 Chevrolet K3500? Posted by Customer
    A:
    Remove the control latch bolts along with the spacer.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What should you do after removing the power door lock actuator for the 2004 Chevrolet Astro? Posted by Customer
    A:
    Access the remote lever rod and disconnect the wiring harness.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What are the final steps after installing the new actuator for the 2000 Chevrolet K3500? Posted by Customer
    A:
    Finally, reinstall the water deflector, trim panel, and access hole cover as necessary.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What should be connected after installing the lock assembly bolts for the 2000 Chevrolet K3500? Posted by Customer
    A:
    Connect the inside handle rod (top rod) and the inside lock rod (bottom rod) to the latch.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock
    Q:
    What should you do after installing the latch assembly for the 2000 Chevrolet K3500? Posted by Customer
    A:
    Install the latch assembly bolts and tighten them to 25 N.m (18 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Tailgate Latch
    Q:
    What should be done after removing the outside door handle for the 2000 Chevrolet K3500? Posted by Customer
    A:
    Disconnect the power door lock connector and remove the lock assembly bolts to take out the lock assembly from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What is important to remember when assembling the bottom two bolts for the 2000 Chevrolet Tahoe? Posted by Customer
    A:
    Loosely assemble the bottom two bolts and close the door to allow the latch assembly to self-adjust.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    How do you access the remote lever rod for the 2001 GMC Safari? Posted by Customer
    A:
    Remove the power door lock actuator to access the remote lever rod and disconnect the wiring harness.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    How do you remove the handle bezel for the 2000 GMC C2500? Posted by Customer
    A:
    Remove the handle bezel by gently prying on the upper snap-in tabs and disengage the linkage rods.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Tailgate Latch
    Q:
    What should be done after removing the trim panel and other components for the 2000 GMC C3500? Posted by Customer
    A:
    Next, detach the actuator lock control rod and disconnect the actuator wiring connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    How do you remove the handle bezel for the 2000 GMC C3500? Posted by Customer
    A:
    Remove the handle bezel by gently prying on the upper snap-in tabs and disengage the linkage rods.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Tailgate Latch
    Q:
    What should be done after removing the rubber plug for the 2000 GMC C2500? Posted by Customer
    A:
    Disconnect the cylinder lock rod.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    Q:
    What is the first step to replace the rear door latch (Cargo Door Upper) for the 2000 GMC C3500? Posted by Customer
    A:
    Begin by removing the door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    How do you adjust the rod after connecting it for the 2000 GMC C3500? Posted by Customer
    A:
    Insert the key into the lock cylinder and adjust the rod by turning the key through the opening.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock
    Q:
    What is the final step after securing the lock assembly for the 2000 GMC C3500? Posted by Customer
    A:
    Reconnect the lock rod to the lock assembly clip and reinstall the access hole cover as necessary.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    How should the latch be installed for the 2000 GMC C2500? Posted by Customer
    A:
    Install the latch onto the door and tighten the bolts to 9 N.m (80 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What is the first step to replace the rear door latch for the 2001 GMC Safari? Posted by Customer
    A:
    Begin by removing the trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Latch Assembly
    Q:
    What should be done after securing the new actuator for the 2003 GMC Safari? Posted by Customer
    A:
    Reconnect the actuator wiring connector, attach the actuator to the lever rod, and finally reinstall the water deflector and trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Lock Actuator
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 22062740, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 22062740 Lock Actuator. It is sometimes referred to as GM Door Lock, GM Door Lock Actuator, GM Tailgate Latch, GM Tailgate Lock, GM Door Latch Assembly. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 22062740 Lock Actuator. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery