Other Name: Weatherstrip Assembly-Rear Side Door Upper Auxiliary; Door Moldings; Door Seal; Glass Weatherstrip; Weatherstrip, Door Weatherstrip; Weatherstrip
Other Name: Sealing Strip Assembly-Rear Side Door Window Outer; Door Moldings; Weatherstrip; Sealing Strip, Rear Side Door Window Glass Running (Outer & Inner)
Position: Rear Outer Passenger Side
Replaces: 15885098, 25756337, 15140395
Item Weight: 0.90 Pounds
Item Dimensions: 42.3 x 2.4 x 1.2 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 25778964
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2003 Cadillac CTS Submodels:
Base, Luxury, Luxury Sport, V | 6 Cyl 2.8 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
Other Name: Weatherstrip Assembly-Rear Compartment Lid; Weatherstrip, Rear Compartment
Position: Rear
Replaces: 25761068
Item Weight: 2.20 Pounds
Item Dimensions: 17.6 x 16.9 x 4.7 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 15932357
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2003 Cadillac CTS Submodels:
Base, Luxury, Luxury Sport, V | 6 Cyl 2.8 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
| Page 1 of 2 |Next >
1-20 of 21 Results
2003 Cadillac CTS Weather Strip
With a comprehensive array of OEM 2003 Cadillac CTS Weather Strip, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2003 Cadillac CTS Weather Strip are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2003 Cadillac CTS Parts Questions & Experts Answers
Q: How to replace the front door Weather Strip on 2003 Cadillac CTS?
A: Replacing the front door weather strip demands removal of the carpet retainer first. Begin at the rear upper door opening corner by pulling out the weather strip from the door opening flange before moving to install it on the rest of the door aperture. During installation place the rubbery side of the weather strip on the external car side. The installation process begins at the rear edge while you place the weather strip onto the door opening flange without missing any corner areas where carriers should rest fully. New weather strip must be carefully fitted against the roof rail and window-pillar flange by working from the center pillar toward the front and by ensuring full corner seating of the carrier. Position the weather strip correctly on the complete door opening flange by striking it with a rubber mallet. Position the close-out lip over the interior trim around the door opening by using a plastic trim stick or equivalent tool while new weather strip makes use of its ripcord to adjust the position of the close-out lip. Finally, reinstall the carpet retainer.