OEM 2003 Chevrolet SSR Brake Line

Brake Hose
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Brake Lines found

  • 2003 Chevy SSR Brake Line - 15112267
    2003 Chevy SSR Brake Line Diagram - 15112267
    View related parts
    Product Specifications
    • Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
    • Position: Passenger Side
    • Replaced by: 19366746
    • Item Weight: 1.30 Pounds
    • Item Dimensions: 3.1 x 25.5 x 2.0 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 15112267
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2003 Chevrolet SSR Submodels:
    • Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
  • 2003 Chevy SSR Brake Line - 15112268
    2003 Chevy SSR Brake Line Diagram - 15112268
    View related parts
    Product Specifications
    • Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
    • Position: Driver Side
    • Replaced by: 15786538
    • Item Weight: 1.00 Pounds
    • Item Dimensions: 26.9 x 4.7 x 2.1 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 15112268
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2003 Chevrolet SSR Submodels:
    • Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
  • 2003 Chevy SSR Brake Line - 19366744
    2003 Chevy SSR Brake Line Diagram - 19366744
    View related parts
    Product Specifications
    • Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
    • Position: Rear Driver Side
    • Replaces: 15134754, 10372503
    • Item Weight: 0.60 Pounds
    • Item Dimensions: 2.0 x 14.3 x 1.0 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 19366744
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2003 Chevrolet SSR Submodels:
    • Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
  • 2003 Chevy SSR Brake Line - 19366689
    2003 Chevy SSR Brake Line Diagram - 19366689
    View related parts
    Product Specifications
    • Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
    • Position: Rear
    • Replaces: 15877297, 10372502, 15134755
    • Item Weight: 1.30 Pounds
    • Item Dimensions: 2.0 x 14.7 x 1.1 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 19366689
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2003 Chevrolet SSR Submodels:
    • Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS

2003 Chevrolet SSR Brake Line

With a comprehensive array of OEM 2003 Chevrolet SSR Brake Line, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2003 Chevrolet SSR Brake Line are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2003 Chevrolet SSR Parts Questions & Experts Answers

  • Q: How to Service and Repair Brake Lines Using the J 45405 Brake Line Flaring Kit on 2003 Chevrolet SSR?
    A: To service and repair the brake pipes, use the J 45405 Brake Pipe Flaring Kit (J 45405) and remember to attend to safety precautions on brake fluid irritants and the use of double-walled steel brake pipes to avoid system failure. Start by examining the point at which the brake pipe to be replaced sits and unhinge from the retainers as required. Measure the length of the pipe to replace the length to be replaced including the bends then the additional length needed for flare this is to make sure that the end to be flared should be cut squarely in a 90-degree angle. Sharp the brake pipe to the specified length with the help of the pipe cutter that comes with J 45405 before removing the cut sectioned pipe. Choose the right brake pipe and tube nuts and strip your nylon coating from the end you are going to flare with the coating stripping tool that is part of the J 45405, and de-burr the inside and outside diameter using the de-burring tool that comes with the kit. Mount the tube nuts, clean the brake pipe and the J 45405, free of contaminants, and prepare to flare the pipe by loosening the die clamping screw and inserting the die halves into die cage. Push the prepared end of the pipe into the dies, tighten the clamping screw, and work at creating flare with the help of forming mandrel. Following flaring, examine the shape and diameter of flare and form the new pipe using an appropriate brake pipe bending equipment if needed. Fit the pipe to the vehicle using the correct unions, attach it to the retainers, bleed out the brake hydraulic system and finish off by checking for leaks, start the engine and press the brakes.

Related 2003 Chevrolet SSR Parts