How to replace the front brake line on 2004 Chevrolet SSR?

You must start the front brake hose replacement process by removing the brake hose mounting bolt from the bike structure and sealing exposed brake pipe ends with rubber caps. Pull off the brake hose bolt from the brake caliper assembly then extract the brake hose from the vehicle while getting rid of any metal gaskets fixed to it. Replace the worn-out copper gaskets and put them onto both ends of the brake hose and bolt. Secure the brake hose bolt to the brake caliper assembly and secure it to 44 nm torque setting (33 ft. Lbs.). Fit the brake hose to the brake caliper then keep it in place before securing the brake hose retaining bolt to the frame and tightening it to 20 nm (18 ft. Lbs). Join the brake pipe to the brake hose by removing the rubber plug and tighten the fitting to 20 nm (18 ft. Lbs.). Refill brake master cylinder and perform hydraulic brake bleeding steps. Also set up the front tire and wheel parts before lowering the vehicle.

OEM 2004 Chevrolet SSR Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Brake Lines found

View related parts
2004 Chevrolet SSR Flex Hose, Passenger Side
Part Number: 15112267
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Passenger Side
- Replaced by: 19366746
- Item Weight: 1.30 Pounds
- Item Dimensions: 3.1 x 25.5 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15112267
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet SSR Submodels:
- Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2004 Chevrolet SSR Flex Hose, Driver Side
Part Number: 15112268
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Driver Side
- Replaced by: 15786538
- Item Weight: 1.00 Pounds
- Item Dimensions: 26.9 x 4.7 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15112268
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet SSR Submodels:
- Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2004 Chevrolet SSR Flex Hose, Rear Driver Side
Part Number: 19366744
Product Specifications
- Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear Driver Side
- Replaces: 15134754, 10372503
- Item Weight: 0.60 Pounds
- Item Dimensions: 2.0 x 14.3 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366744
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet SSR Submodels:
- Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2004 Chevrolet SSR Flex Hose, Rear
Part Number: 19366689
Product Specifications
- Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear
- Replaces: 15877297, 10372502, 15134755
- Item Weight: 1.30 Pounds
- Item Dimensions: 2.0 x 14.7 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366689
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet SSR Submodels:
- Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS

2004 Chevrolet SSR Brake Line

With a comprehensive array of OEM 2004 Chevrolet SSR Brake Line, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Chevrolet SSR Brake Line are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Chevrolet SSR Parts Questions & Experts Answers

Q: How to replace the front brake line on 2004 Chevrolet SSR?
A: You must start the front brake hose replacement process by removing the brake hose mounting bolt from the bike structure and sealing exposed brake pipe ends with rubber caps. Pull off the brake hose bolt from the brake caliper assembly then extract the brake hose from the vehicle while getting rid of any metal gaskets fixed to it. Replace the worn-out copper gaskets and put them onto both ends of the brake hose and bolt. Secure the brake hose bolt to the brake caliper assembly and secure it to 44 nm torque setting (33 ft. Lbs.). Fit the brake hose to the brake caliper then keep it in place before securing the brake hose retaining bolt to the frame and tightening it to 20 nm (18 ft. Lbs). Join the brake pipe to the brake hose by removing the rubber plug and tighten the fitting to 20 nm (18 ft. Lbs.). Refill brake master cylinder and perform hydraulic brake bleeding steps. Also set up the front tire and wheel parts before lowering the vehicle.