Make sure this part fits

GM 19366744
Flex Hose, Rear Driver Side

2002-2006 GM

Customer Questions & Expert Answers (15)
GM 19366744 Flex Hose, Rear Driver Side
  • Part Description
    Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line
  • Position
    Rear Driver Side
  • Replaces
    15134754, 10372503
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2005 Buick RainierCXL, CXL Plus6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2003-2006 Chevrolet SSRBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2002-2005 Chevrolet TrailblazerLS, LT, LTZ, North Face6 Cyl 4.2 L GAS
    2002-2005 Chevrolet Trailblazer EXTLS, LT, North Face6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2005 GMC EnvoyDenali, SLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2005 GMC Envoy XLDenali, SLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2004-2005 GMC Envoy XUVSLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2004 Oldsmobile BravadaBase6 Cyl 4.2 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 19366744 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19366744 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should you check for when removing the brake hose for the 2005 Buick Rainier? Posted by Customer
    A:
    Be aware that the metal gaskets may be stuck to either the brake caliper or the brake hose end; ensure these gaskets are removed from both locations and discard them.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be used for installation of the brake hose for the 2004 Buick Rainier? Posted by Customer
    A:
    Use only NEW copper gaskets, attaching them to the brake hose and bolt before securing the brake hose bolt to the brake caliper, tightening it to 44 Nm (33 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done to prevent brake fluid loss and contamination for the 2006 Chevrolet SSR? Posted by Customer
    A:
    Install a rubber cap or plug on the exposed brake pipe fitting ends.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    How should the brake hose be reattached for the 2004 Chevrolet SSR? Posted by Customer
    A:
    Attach the brake hose bolt to the brake caliper, tightening it to 44 Nm (33 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be removed after the rear brake hose is detached for the 2003 Chevrolet SSR? Posted by Customer
    A:
    Remove the brake line retaining bolt at the frame and the brake hose bolt from the brake caliper, taking care to remove any metal gaskets stuck to the brake caliper or brake hose end, and discard the copper gaskets.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be removed after the rear brake hose is detached for the 2005 Chevrolet SSR? Posted by Customer
    A:
    Remove the brake line retaining bolt at the frame and the brake hose bolt from the brake caliper.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    How is the new pipe installed for the 2003 Chevrolet SSR? Posted by Customer
    A:
    Install the pipe to the vehicle with the appropriate unions, secure it to the retainers, bleed the hydraulic brake system, and finally, check for leaks by starting the engine and applying the brakes.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done after installing the rear brake hose to the rear brake caliper for the 2004 Chevrolet Trailblazer? Posted by Customer
    A:
    Remove the rubber plug or cap from the rear brake pipe fitting, install the brake pipe to the brake hose, and tighten the rear brake pipe fitting to 20 Nm (18 ft. lbs.) using a backup wrench.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done after securing the new brake pipe for the 2003 Chevrolet Trailblazer? Posted by Customer
    A:
    Tighten the brake pipe fittings to the proper specifications.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the final step after connecting the brake hose fitting to the brake pipe fitting for the 2002 Chevrolet Trailblazer? Posted by Customer
    A:
    Bleed the hydraulic brake system, remove the safety stands, and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What are the final steps after installing the brake hose for the 2003 GMC Envoy? Posted by Customer
    A:
    Bleed the hydraulic brake system, install the tire and wheel assembly, and finally lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    How do you prepare to flare the pipe for the 2005 Chevrolet Trailblazer? Posted by Customer
    A:
    Loosen the die clamping screw and install the die halves.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the torque specification for installing the brake hose retaining bolt to the frame for the 2005 GMC Envoy? Posted by Customer
    A:
    Tighten it to 20 Nm (18 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What are the final steps after installing the brake hoses for the 2004 GMC Envoy? Posted by Customer
    A:
    Fill the master cylinder reservoir if necessary, bleed the brake system, and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Flex Hose, Rear Driver Side 19366744 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19366744 Flex Hose, Rear Driver Side is available in the market under the name GM Brake Line. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19366744 Flex Hose, Rear Driver Side fits certain Chevrolet SSR, Trailblazer, Trailblazer EXT models, as well as GMC Envoy, Envoy XL, Envoy XUV. Additionally, it is compatible with Buick Rainier and Oldsmobile Bravada models.
The original GM component designated by manufacturer part number 19366744 maintains top performance when functioning as the Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line unit at its Rear Driver Side. The component 19366744 is constructed from durable material and its dimensions span 2.0 x 14.3 x 1.0 inches while weighing 0.60 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Hose, Hydraulic Brake. The part 19366744 has available replacement options 15134754, 10372503. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.