Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 15158972
Splash Shield, Rear Driver Side

2002-2009 GM

Customer Questions & Expert Answers (13)
GM 15158972 Splash Shield, Rear Driver Side
GM 15158972 Splash Shield, Rear Driver Side
GM 15158972 Splash Shield, Rear Driver Side
GM 15158972 Splash Shield, Rear Driver Side
  • Part Description
    Shield, Rear Brake
  • Position
    Rear Driver Side
  • Manufacturer
    General Motors
Make sure this part fits
$38.56 MSRP: $69.80
You Save: $31.24 (45%)
Ships in 1 Business Day
1
ADD TO CART

  • 15158972 Splash Shield, Rear Driver Side is Ref No. 13 in the diagram below

    2008 GMC Envoy Splash Shield, Rear Driver Side Diagram for 15158972
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 15158972

  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2007 Buick RainierCXL, CXL Plus6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2003-2006 Chevrolet SSRBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2002-2009 Chevrolet TrailblazerBase, LS, LT, LTZ, North Face, SS6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2002-2006 Chevrolet Trailblazer EXTLS, LT, North Face6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2009 GMC EnvoyDenali, SLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2006 GMC Envoy XLDenali, SLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2004-2005 GMC Envoy XUVSLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2004 Oldsmobile BravadaBase6 Cyl 4.2 L GAS
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is this 15158972 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15158972 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the rear disc brake backing plate on Buick Rainier? Posted by Customer
    A:
    The first step for backing plate replacement of rear disc brake is to lift the vehicle and take off the tire and wheel assembly. The maintenance process begins with disconnection of the park brake cable from the rear brake caliper which needs to be followed by brake caliper and bracket assembly separation and finally removal of the rear brake rotor. The procedure now demands elimination of the park brake shoe together with the rear drive axle components. Detach and remove the backing plate retaining nuts followed by backing plate removal from the housing of the rear axle. To put in place the backing plate apply it to the axle housing flange before tightening backing plate nuts to 135 nm (100 ft. Lbs.). As part of reinstallation install the park brake shoe followed by the rear drive axle accompanied by the rear brake rotor and brake caliper and bracket assembly. Start by reattaching the brake cable to the rear brake caliper then adjust the park brake shoe before putting the tire along with wheel back on the vehicle and allowing it to lower.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the rear disc brake backing plate on Chevrolet SSR? Posted by Customer
    A:
    Before working on the Brake Backing Plate raise your vehicle and take off its wheel and tire assembly. Securing both left and right brake cables take priority when you remove their connections to the rear brake caliper's park brake system. Start by taking off the brake caliper unit with bracket and then disconnect the rear rotor and park brake shoe. First you need to empty the rear drive axle and its mounting bolts from the backing plate before taking off the backing plate from the axle housing. Position the backing plate on the axle housing flange and tighten its nuts to 135 nm (100 ft. Lbs) using the backing plate nuts. Install the drive axle first then put back the park brake shoe and rotor before placing the brake caliper and bracket components. Link the park brake cable to the rear brake caliper while adjusting the park brake shoe correctly. Put back both parts and carefully lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    Q:
    What comes after removing the front hub and bearing assembly for the 2005 Buick Rainier? Posted by Customer
    A:
    Take out the retaining bolts for the splash shield and then remove the splash shield itself.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Dust Shields
    Q:
    What components should be reinstalled after securing the backing plate for the 2002 Chevrolet Trailblazer? Posted by Customer
    A:
    Reinstall the rear drive axle, park brake shoe, and rear brake rotor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Backing Plate
    Q:
    What is the first step to replace the rear disc brake backing plate for the 2006 Chevrolet SSR? Posted by Customer
    A:
    Raise the vehicle and remove the tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Backing Plate
    Q:
    What is the final step in the process for the 2005 Chevrolet SSR? Posted by Customer
    A:
    Lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Dust Shields
    Q:
    What should be done after reinstalling the brake components for the 2003 Chevrolet SSR? Posted by Customer
    A:
    Reconnect the park brake cable to the rear brake caliper and adjust the park brake shoe.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Backing Plate
    Q:
    How should the retaining bolts be tightened for the 2006 Chevrolet SSR? Posted by Customer
    A:
    Ensure they are tightened in the same manner as the wheel hub and bearing.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Dust Shields
    Q:
    How do you install the new splash shield for the 2003 Chevrolet SSR? Posted by Customer
    A:
    Begin by placing the new splash shield in position and securing it with the retaining bolts, ensuring they are tightened similarly to the wheel hub and bearing.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Dust Shields
    Q:
    What is the first step to replace the front disc brake splash shield for the 2006 GMC Envoy? Posted by Customer
    A:
    Raise the vehicle and remove the tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Dust Shields
    Q:
    What should be done after removing the tire and wheel assembly for the 2002 Chevrolet Trailblazer? Posted by Customer
    A:
    Take out the front hub and bearing assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Dust Shields
    Q:
    What should be done after tightening the mounting bolts for the 2004 GMC Envoy? Posted by Customer
    A:
    Install the backing plate retaining bolts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Backing Plate
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Splash Shield, Rear Driver Side 15158972 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15158972 Splash Shield, Rear Driver Side is available in the market under the name GM Brake Backing Plate, Brake Dust Shields. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15158972 Splash Shield, Rear Driver Side fits certain Chevrolet SSR, Trailblazer, Trailblazer EXT models, as well as GMC Envoy, Envoy XL, Envoy XUV. Additionally, it is compatible with Buick Rainier and Oldsmobile Bravada models.
The original GM component designated by manufacturer part number 15158972 maintains top performance when functioning as the Shield, Rear Brake unit at its Rear Driver Side. The component 15158972 is constructed from durable material and its dimensions span 15.8 x 15.0 x 1.6 inches while weighing 1.60 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Shield; Shield, Brake Flange Plate. The part 15158972 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.