How to replace the front brake line on 2005 GMC Envoy?

The first step to replace front brake hose requires unbolting the retaining bolt attached to the frame. Protect the exposed brake pipe fitting ends by installing rubber caps or plugs to block out the loss of fluid and contamination. Start by removing the brake hose bolt installed on the brake caliper assembly then remove the brake hose from the vehicle. Throw away copper gaskets while you take away metal gaskets from the brake hose ends and brake caliper. Before mounting the brake caliper bolt a new copper gasket needs to be applied to the brake hose and bolt then tighten the assembly at 44 nm (33 ft. Lbs.). Screw the brake hose retaining bolt into the frame before tightening it to 20 nm (18 ft. Lbs.). Connect the brake pipe to its matching brake hose while tightening the fitting until it reaches 20 nm (18 ft. Lbs. Torque). The process consists of filling the brake master cylinder reservoir followed by bleeding the hydraulic brake system before completing front tire installation and motor vehicle descent.

OEM 2005 GMC Envoy Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Brake Lines found

View related parts
2005 GMC Envoy Flex Hose, Passenger Side
Part Number: 15112267
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Passenger Side
- Replaced by: 19366746
- Item Weight: 1.30 Pounds
- Item Dimensions: 3.1 x 25.5 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15112267
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 GMC Envoy Submodels:
- Denali, SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
View related parts
2005 GMC Envoy Flex Hose, Driver Side
Part Number: 15112268
Product Specifications
- Other Name: Hose, Hydraulic Brake; Hydraulic Hose; Brake Hose; Brake Line
- Position: Driver Side
- Replaced by: 15786538
- Item Weight: 1.00 Pounds
- Item Dimensions: 26.9 x 4.7 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15112268
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 GMC Envoy Submodels:
- Denali, SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
View related parts
2005 GMC Envoy Flex Hose, Rear Driver Side
Part Number: 19366744
Product Specifications
- Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear Driver Side
- Replaces: 15134754, 10372503
- Item Weight: 0.60 Pounds
- Item Dimensions: 2.0 x 14.3 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366744
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 GMC Envoy Submodels:
- Denali, SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
View related parts
2005 GMC Envoy Flex Hose, Rear
Part Number: 19366689
Product Specifications
- Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear
- Replaces: 15877297, 10372502, 15134755
- Item Weight: 1.30 Pounds
- Item Dimensions: 2.0 x 14.7 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366689
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 GMC Envoy Submodels:
- Denali, SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS

2005 GMC Envoy Brake Line

With a comprehensive array of OEM 2005 GMC Envoy Brake Line, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 GMC Envoy Brake Line are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 GMC Envoy Brake Line Parts Questions & Experts Answers

Q: How to replace the front brake line on 2005 GMC Envoy?
A: The first step to replace front brake hose requires unbolting the retaining bolt attached to the frame. Protect the exposed brake pipe fitting ends by installing rubber caps or plugs to block out the loss of fluid and contamination. Start by removing the brake hose bolt installed on the brake caliper assembly then remove the brake hose from the vehicle. Throw away copper gaskets while you take away metal gaskets from the brake hose ends and brake caliper. Before mounting the brake caliper bolt a new copper gasket needs to be applied to the brake hose and bolt then tighten the assembly at 44 nm (33 ft. Lbs.). Screw the brake hose retaining bolt into the frame before tightening it to 20 nm (18 ft. Lbs.). Connect the brake pipe to its matching brake hose while tightening the fitting until it reaches 20 nm (18 ft. Lbs. Torque). The process consists of filling the brake master cylinder reservoir followed by bleeding the hydraulic brake system before completing front tire installation and motor vehicle descent.