OEM 2003 Chevrolet Venture Crankshaft Position Sensor

2003 Chevrolet Venture Parts Questions & Experts Answers

• Q: How to service and repair the Crankshaft Position Sensor on 2003 Chevrolet Venture?

  A: To service and repair Crankshaft Position Sensor, please follow the steps involving installation of a scan tool and monitoring powertrain control module for dtcs and thus identify p1336 dtc other than any other dtc present and check dtc list for more information. Select the crankshaft position (CKP) variation learn procedure using the scan tool and see the fuel cut-off for the engine being discussed. Follow the instructions that come with the scan tool to block the drive wheels, apply the park brake, switch the ignition from off to on, depress the brake pedal, and start and idle the engine, switch off a/c, and put the transmission in park (A/T) or neutral (M/T). The scan tool will be used to observe activities of the ckp sensor, cmp sensor, and the engine coolant temperatures (ECT); leave the engine idle and only then turn it off if it does not warm up sufficiently to the required temperature. Make the system variation learn procedure with the scan tool and gradually raise the engine speed to the observed rpm. It is essential to release the throttle immediate when the engine begins to decelerate since the operator shall regain the control after the learn procedure is done. Flip the toggle off, and when you pull the throttle, the scan tool will show "learn status: learned this ignition." if there is no display of this message, and no other dtcs are displayed, then check for symptoms associated with the engine. If dtc is present, then check the dtc list for specific details. Finally, turn off the ignition after successfully completing the learn procedure for 30 seconds.