ChevyParts
My Garage
My Account
Cart
OEM 2003 GMC Envoy Axle Shaft
Car Axle Shaft- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
7 Axle Shafts found
2003 GMC Envoy Axle Assembly, Front
Part Number: 26079789$387.46 MSRP: $615.16You Save: $227.70 (38%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Shaft Kit, Front Wheel Drive; CV Axle Assembly; Axle Shaft; CV Axle; Shaft Kit, Front Axle
- Position: Front
- Item Weight: 19.80 Pounds
- Item Dimensions: 5.2 x 5.2 x 36.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 26079789
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2003 GMC Envoy Intermediate Shaft, Front
Part Number: 12479125$376.93 MSRP: $593.06You Save: $216.13 (37%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Shaft, Front Axle; Axle Shaft; Axle Shafts; Intermed Shaft
- Position: Front
- Item Weight: 4.70 Pounds
- Item Dimensions: 13.5 x 4.5 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12479125
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: Shaft, Rear Axle (Right-Hand); Axle Shafts; Axle; Shaft, Rear Axle Drive
- Position: Rear Passenger Side
- Replaces: 12479161
- Item Weight: 19.30 Pounds
- Item Dimensions: 34.0 x 6.6 x 6.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19133413
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: Axle, Rear Axle; Axle Shaft
- Position: Rear
- Replaces: 15065723, 15107453, 15171759
- Condition: New
- SKU: 15134677
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: Shaft, Rear Axle Drive; Axle Shafts
- Position: Rear Passenger Side
- Replaces: 12479017
- Item Weight: 19.80 Pounds
- Item Dimensions: 34.0 x 6.9 x 6.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19133410
- Warranty: This genuine part is guaranteed by GM's factory warranty.
- Product Specifications
- Other Name: Shaft, Rear Axle Drive; Axle Shafts
- Position: Rear Driver Side
- Replaces: 12479016
- Item Weight: 19.40 Pounds
- Item Dimensions: 34.3 x 6.8 x 7.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19133409
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: Shaft, Rear Axle Drive; Axle Shafts; Axle
- Position: Rear Driver Side
- Replaces: 12479160
- Item Weight: 19.70 Pounds
- Item Dimensions: 33.9 x 7.1 x 7.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19133412
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2003 GMC Envoy Axle Shaft
With a comprehensive array of OEM 2003 GMC Envoy Axle Shaft, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2003 GMC Envoy Axle Shaft are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2003 GMC Envoy Parts Questions & Experts Answers
- Q: How to replace the front axle shaft on 2003 GMC Envoy?A: The procedure begins by raising the vehicle then taking off tires and wheels and the engine protection shield. First detach the Wheel Speed Sensor wiring harness from its retainer attachment points then disconnect the Wheel Speed Sensor from its harness. Start by removing three bolts: the front brake hose retaining bolt along with the front stabilizer bar link from the lower Control Arm and finally the upper shock module retaining from the shock tower. To begin the replacement process start by taking out the Steering Knuckle Tie Rod End and both left and right upper ball joints pinch bolts and nuts as well as the shock module mounted to the shock tower. The technician needs to remove the Steering Knuckle from the upper Control Arm while detaching the front Axle Shaft from the Steering Knuckle. The front shock module/steering knuckle needs frame support through the use of mechanics wire or hooks. The left side Axle Shaft needs to be released from the Differential carrier assembly by using a brass drift to strike the tripot housing outward with a hammer until the snap ring pressure is overcome. After performing the same procedure at the clutch fork housing assembly on the right side you should remove the Axle Shaft directly from both assemblies. Begin installation by inserting the front Axle Shaft into the front Differential assembly before removing the mechanics wire or hook from the front shock module/steering knuckle. Mount the front Axle Shaft into its slot within the Steering Knuckle before placing and tethering the shock module inside the shock tower. Drive the upper ball joint through the upper Control Arm opening before tightening it down using a pinch bolt and nut which require specific torque specifications. Next install both shock module retaining nuts and then install the front Axle Shaft retaining. Torque the new front Axle Shaft retaining nut to meet 140 nm (103 ft. Lbs.). Install the Tie Rod End back into the Steering Knuckle while also securing its position with stabilizer bar links and front brake hose retaining bolt. Install the front Wheel Speed Sensor wiring harness in its retainers before reconnecting the sensor's electrical connector. The engine protection shield then returns with the tire and wheel assembly and the vehicle must be lowered.
Related 2003 GMC Envoy Parts
2003 GMC Envoy Air Suspension Compressor
2003 GMC Envoy Control Arm
2003 GMC Envoy Sway Bar Link
2003 GMC Envoy CV Joint
2003 GMC Envoy CV Boot
2003 GMC Envoy Coil Spring Insulator
2003 GMC Envoy Control Arm Bracket
2003 GMC Envoy Ride Height Sensor
2003 GMC Envoy Shock Absorber
2003 GMC Envoy Sway Bar Bushing
2003 GMC Envoy Sway Bar Kit
2003 GMC Envoy Trailing Arm