Make sure this part fits

GM 19133409
Axle Shaft, Rear Driver Side

2002-2009 GM

Customer Questions & Expert Answers (10)
GM 19133409 Axle Shaft, Rear Driver Side
  • Part Description
    Shaft, Rear Axle Drive
  • Position
    Rear Driver Side
  • Replaces
    12479016
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number19133409
    Part DescriptionShaft, Rear Axle Drive
    Other NamesAxle Shafts
    Item Dimensions34.3 x 6.8 x 7.0 inches
    Item Weight19.40 Pounds
    PositionRear Driver Side
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces12479016
    ManufacturerGeneral Motors
    SKU19133409
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2007 Buick RainierCXL, CXL Plus6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2009 Chevrolet TrailblazerBase, LS, LT, LTZ, North Face, SS6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2002-2009 GMC EnvoyDenali, SLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2004 Oldsmobile BravadaBase6 Cyl 4.2 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is this 19133409 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19133409 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the next step after removing the axle shaft from the housing for the 2004 Buick Rainier? Posted by Customer
    A:
    Carefully insert the new axle shaft into the rear axle housing, sliding it into place to engage the splines with the differential side gear.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should be done before removing the axle shaft for the 2005 Buick Rainier? Posted by Customer
    A:
    Push the flange of the axle shaft toward the differential and remove the C-lock from the button end of the axle shaft, ensuring not to rotate the shaft to avoid misalignment of the gears.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the procedure for placing the C-lock for axles without a locking differential for the 2007 Buick Rainier? Posted by Customer
    A:
    Place the C-lock on the button end of the axle shaft.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the procedure for axles with a locking differential during installation for the 2009 Chevrolet Trailblazer? Posted by Customer
    A:
    Keep the pinion shaft partially withdrawn and place the C-lock on the axle shaft so that the ends are flush with the thrust block.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the first step for installation for the 2004 Chevrolet Trailblazer? Posted by Customer
    A:
    Install the front wheel drive axle in the front differential assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What tools can be used if the axle is difficult to remove for the 2008 Chevrolet Trailblazer? Posted by Customer
    A:
    Utilize the J 45859 (Axle Remover) and J 2619-01 (Slide Hammer) to assist in extraction.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should be done after securing the upper ball joint for the 2003 GMC Envoy? Posted by Customer
    A:
    Install the shock module retaining nuts with the correct torque, followed by the front wheel drive shaft retaining.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What are the final steps after reinstalling the pinion shaft for the 2004 GMC Envoy? Posted by Customer
    A:
    Reinstall the rear brake drums, the rear axle housing cover along with the gasket, fill the rear axle with fluid, and finish by putting the tire and wheel back on.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should be done after aligning the holes for the 2003 Chevrolet Trailblazer? Posted by Customer
    A:
    Install the new pinion shaft locking bolt and tighten it to 36 Nm (27 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 19133409, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 19133409 Axle Shaft, Rear Driver Side. It is sometimes referred to as GM Axle Shaft. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 19133409 Axle Shaft, Rear Driver Side. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery