Make sure this part fits

GM 19133412
Axle Shaft, Rear Driver Side

2002-2009 GM

Customer Questions & Expert Answers (13)
GM 19133412 Axle Shaft, Rear Driver Side
  • Part Description
    Shaft, Rear Axle Drive
  • Position
    Rear Driver Side
  • Replaces
    12479160
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2007 Buick RainierCXL, CXL Plus6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2003-2006 Chevrolet SSRBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2002-2009 Chevrolet TrailblazerBase, LS, LT, LTZ, North Face, SS6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2002-2006 Chevrolet Trailblazer EXTLS, LT, North Face6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2009 GMC EnvoyDenali, SLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2006 GMC Envoy XLDenali, SLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2004-2005 GMC Envoy XUVSLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2004 Oldsmobile BravadaBase6 Cyl 4.2 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 19133412 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19133412 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you align the C-lock for the 2007 Buick Rainier? Posted by Customer
    A:
    Use a screwdriver or similar tool to rotate the C-lock until it aligns with the thrust block.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should be done for axles without a locking differential after inserting the new axle shaft for the 2004 Buick Rainier? Posted by Customer
    A:
    Place the C-lock on the button end of the axle shaft.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the first step to replace the rear axle shaft for the 2005 Buick Rainier? Posted by Customer
    A:
    Raise the vehicle and remove the tire and wheel assembly, followed by the brake caliper.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should be installed after the C-lock for the 2006 Chevrolet SSR? Posted by Customer
    A:
    Install the thrust block and the new thrust lock bolt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the first step to replace the rear axle shaft for the 2003 Chevrolet SSR? Posted by Customer
    A:
    Raise the vehicle and remove the tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should be ensured while removing the axle shaft for the 2005 Chevrolet SSR? Posted by Customer
    A:
    Ensure not to rotate the shaft to avoid misaligning the gears.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What are the torque specifications for the pinion shaft locking bolt for the 2008 Chevrolet Trailblazer? Posted by Customer
    A:
    Tighten it to 36 N.m (27 lb ft) for the 8.0/8.6 inch axle or 50 N.m (37 lb ft) for the 9.5 LD inch axle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the next step after removing the axle shaft from the housing for the 2003 Chevrolet Trailblazer? Posted by Customer
    A:
    Carefully insert the new axle shaft into the rear axle housing, sliding it into place to engage the splines with the differential side gear.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should be done to support the front shock module/steering knuckle for the 2004 Chevrolet Trailblazer? Posted by Customer
    A:
    Support it to the frame using mechanics wire or a hook.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the torque specification for the new pinion shaft locking bolt for the 8.0/8.6 inch axle for the 2009 Chevrolet Trailblazer? Posted by Customer
    A:
    Tighten it to 36 Nm (27 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What should be done after removing the tires and wheels for the 2004 GMC Envoy? Posted by Customer
    A:
    Take off the clip retaining the rear brake drum if necessary, then remove the rear brake drums from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    Q:
    What is the next step after positioning the shock module for the 2003 GMC Envoy? Posted by Customer
    A:
    Install the upper ball joint in the upper control arm and secure it with the pinch bolt and nut, ensuring proper torque is applied.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Axle Shaft
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Axle Shaft, Rear Driver Side 19133412 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19133412 Axle Shaft, Rear Driver Side is available in the market under the name GM Axle Shaft. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19133412 Axle Shaft, Rear Driver Side fits certain Chevrolet SSR, Trailblazer, Trailblazer EXT models, as well as GMC Envoy, Envoy XL, Envoy XUV. Additionally, it is compatible with Buick Rainier and Oldsmobile Bravada models.
The original GM component designated by manufacturer part number 19133412 maintains top performance when functioning as the Shaft, Rear Axle Drive unit at its Rear Driver Side. The component 19133412 is constructed from durable material and its dimensions span 33.9 x 7.1 x 7.1 inches while weighing 19.70 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Axle Shafts; Axle. The part 19133412 has available replacement options 12479160. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.