How to replace the rear brake calipers on 2003 GMC Envoy?

To replace the rear brake caliper, you need to lift the vehicle off the ground and take off the tire and wheel assembly first. Then remove the rear brake hose bolt from the rear brake caliper and plug the open end of the brake hose to prevent excessive brake fluid from being lost and getting contaminated. Discard away the metal (copper) gaskets, remove them from the brake hose bolt. After that, remove the rear brake caliper mounting bolts, and pull the rear brake from the mounting bracket. In case of recycling the brake caliper guide pin, make it clean with denatured alcohol and dried with non-lubricated and filtered air. Apply the high temperature silicone brake lubricant on the guide pin, allowing it to slide, but not an the brake pad hardware. Mount the rear brake caliper assembly on the mounting bracket bolt and tighten the brake caliper mounting bolts with a torque of 31 Nm (23 ft. lbs.). Install new metal (copper) gaskets on brake hose bolt, plug out the plug from the brake hose end, insert the brake hose bolt into the rear brake caliper and tighten it to 44 Nm (33 ft. lbs.). Finally, bleed the hydraulic brake system, and replace tire and wheel assembly, and lower the vehicle.

OEM 2003 GMC Envoy Brake Calipers

Caliper

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Brake Calipers found

View related parts
2003 GMC Envoy Caliper Part Number: 88966985
Product Specifications
- Other Name: Caliper, Front Brake; Brake Caliper; Caliper, Wheel Brake Cylinder/Caliper
- Position: Front
- Replaces: 12497783
- Item Weight: 5.20 Pounds
- Item Dimensions: 5.2 x 14.3 x 13.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88966985
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 GMC Envoy Submodels:
- Denali, SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
View related parts
2003 GMC Envoy Caliper Part Number: 89027178
Product Specifications
- Other Name: Caliper Assembly, Rear Brake; Brake Caliper; Caliper, Wheel Brake Cylinder/Caliper
- Position: Rear
- Replaces: 88935778
- Item Weight: 2.30 Pounds
- Item Dimensions: 8.3 x 6.3 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89027178
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 GMC Envoy Submodels:
- Denali, SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
View related parts
2003 GMC Envoy Caliper Part Number: 89027177
Product Specifications
- Other Name: Caliper, Wheel Brake Cylinder/Caliper; Brake Caliper
- Position: Rear
- Replaces: 88935777
- Item Weight: 2.30 Pounds
- Item Dimensions: 8.2 x 6.4 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89027177
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 GMC Envoy Submodels:
- Denali, SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
View related parts
2003 GMC Envoy Caliper Part Number: 88966986
Product Specifications
- Other Name: Caliper, Front Brake; Brake Caliper; Caliper, Wheel Brake Cylinder/Caliper
- Position: Front
- Replaces: 12497784
- Item Weight: 5.10 Pounds
- Item Dimensions: 5.1 x 14.1 x 13.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88966986
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 GMC Envoy Submodels:
- Denali, SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
View related parts
2003 GMC Envoy Overhaul Kit Part Number: 88964425
Product Specifications
- Other Name: Caliper Kit, Front Brake; Brake Caliper Repair Kit; Disc Brake Hardware Kit; Caliper Kit, Wheel Brake Cylinder/Caliper
- Position: Front
- Replaces: 12497787
- Item Weight: 1.30 Pounds
- Item Dimensions: 5.2 x 3.1 x 14.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 88964425
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 GMC Envoy Submodels:
- Denali, SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS

2003 GMC Envoy Brake Calipers

With a comprehensive array of OEM 2003 GMC Envoy Brake Calipers, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2003 GMC Envoy Brake Calipers are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2003 GMC Envoy Brake Calipers Parts and Q&A

Q: How to replace the rear brake calipers on 2003 GMC Envoy?
A: To replace the rear brake caliper, you need to lift the vehicle off the ground and take off the tire and wheel assembly first. Then remove the rear brake hose bolt from the rear brake caliper and plug the open end of the brake hose to prevent excessive brake fluid from being lost and getting contaminated. Discard away the metal (copper) gaskets, remove them from the brake hose bolt. After that, remove the rear brake caliper mounting bolts, and pull the rear brake from the mounting bracket. In case of recycling the brake caliper guide pin, make it clean with denatured alcohol and dried with non-lubricated and filtered air. Apply the high temperature silicone brake lubricant on the guide pin, allowing it to slide, but not an the brake pad hardware. Mount the rear brake caliper assembly on the mounting bracket bolt and tighten the brake caliper mounting bolts with a torque of 31 Nm (23 ft. lbs.). Install new metal (copper) gaskets on brake hose bolt, plug out the plug from the brake hose end, insert the brake hose bolt into the rear brake caliper and tighten it to 44 Nm (33 ft. lbs.). Finally, bleed the hydraulic brake system, and replace tire and wheel assembly, and lower the vehicle.