How to replace the front cross-member for the steering gear on 2003 GMC Envoy?

Before attempting to replace the steering gear crossmember at the front with a new one, first raise and support the vehicle. Take out the engine shield mounting bolts and remove the engine shield. Then remove the rear lower Control Arm Bracket to frame mounting bolts, and the steering gear cross member mounting bolts to disconnect the steering gear cross member. For installation, first put your steering gear crossmember in place, and remember the fastener notice in service precautions. Secure the steering gear crossmember mounting bolts to a torque of 50 n.m (37 lb ft), then attach the rear lower Control Arm Bracket to frame mounting bolts, attach the rear lower Control Arm Bracket to frame mounting bolts to 240 n.m (177 lb ft). Replace the engine shield and its mounting bolts and tighten the bolts to 25 n.m (18 lb ft) and then lower the vehicle.

OEM 2003 GMC Envoy Front Cross-Member

Front Engine Cross Member

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Front Cross-Members found

View related parts
2003 GMC Envoy Transmission Support Part Number: 15090722
Product Specifications
- Other Name: Crossmember, Transmission Support; Transfer Case Mount; Transmission Mount; Trans Crossmember; Crossmember, Transmission Mounting
- Replaces: 15020364
- Item Weight: 10.90 Pounds
- Item Dimensions: 7.8 x 36.8 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15090722
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 GMC Envoy Submodels:
- Denali, SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
View related parts
2003 GMC Envoy Front Crossmember Part Number: 15085421
Product Specifications
- Other Name: Crossmember, Intermediate (Transmission Support Cross Member); Crossmember; Crossmember, Intermediate(Transmission Support Cross Member)
- Item Weight: 11.10 Pounds
- Item Dimensions: 32.8 x 10.6 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15085421
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 GMC Envoy Submodels:
- Denali, SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS

2003 GMC Envoy Front Cross-Member

With a comprehensive array of OEM 2003 GMC Envoy Front Cross-Member, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2003 GMC Envoy Front Cross-Member are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2003 GMC Envoy Front Cross-Member Parts and Q&A

Q: How to replace the front cross-member for the steering gear on 2003 GMC Envoy?
A: Before attempting to replace the steering gear crossmember at the front with a new one, first raise and support the vehicle. Take out the engine shield mounting bolts and remove the engine shield. Then remove the rear lower Control Arm Bracket to frame mounting bolts, and the steering gear cross member mounting bolts to disconnect the steering gear cross member. For installation, first put your steering gear crossmember in place, and remember the fastener notice in service precautions. Secure the steering gear crossmember mounting bolts to a torque of 50 n.m (37 lb ft), then attach the rear lower Control Arm Bracket to frame mounting bolts, attach the rear lower Control Arm Bracket to frame mounting bolts to 240 n.m (177 lb ft). Replace the engine shield and its mounting bolts and tighten the bolts to 25 n.m (18 lb ft) and then lower the vehicle.