How to replace the front door window regulator on 2003 GMC Envoy?

You must start the front door Window Regulator replacement by taking off the door trim panel alongside the speaker and water deflector. The first step involves disconnecting the electrical connector from the regulator motor while you lift and support the window and then loosen the bolts from the regulator window carrier. Proceed by loosening the regulator assembly bolts which connect it to the door and then detach the remaining 3 bolts used to secure the combination of regulator assembly and motor. Raise the regulator assembly upwards to unfasten upper 2 bolts while rotating the elevated part toward the front and finally extract the piece through the door opening onto a prepared surface. Users should take out the upper 2 bolts attached to the regulator assembly. Start by connecting the upper 2 regulator assembly bolts and position it semi-horizontally until the forward section reaches the door cavity then complete the vertical rotation. Lower the regulator assembly to the door sheet metal while using the upper 2 bolts for hanging. The motor retention bolt for the door reaches 9 n.m (80 lb in) torque strength before adding the remaining door bolts for the regulator assembly at 10 n.m (88 lb in). You must connect the electrical parts to the motor before disconnecting the support and having the window slide down the carrier. After allowing the regulator window carrier bolts to become slightly loose proceed with opening the window to its highest position within the run channels before fully tightening bolts to 10 n.m (88 lb in). Installation concludes with inserting the water deflector and speaker while putting on the door trim panel.

OEM 2003 GMC Envoy Window Regulator

Electric Power Window Regulator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Window Regulators found

View related parts
2003 GMC Envoy Window Regulator, Rear Driver Side
Part Number: 19301979
$168.39 MSRP: $299.36
You Save: $130.97 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator Assembly, Rear Side Door Window (W/O Motor) (Left-Hand); Power Window Motor and Regulator Assembly
- Position: Rear Driver Side
- Replaces: 15205954, 15893780, 21996409, 10356990, 15169271, 15142774, 15111922
- Item Weight: 2.40 Pounds
- Item Dimensions: 25.6 x 16.8 x 9.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19301979
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 GMC Envoy Submodels:
- Denali, SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
View related parts
2003 GMC Envoy Window Regulator, Rear Driver Side
Part Number: 19331462
$185.45 MSRP: $363.07
You Save: $177.62 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator Assembly, Rear Side Door Window (W/O Motor) (Left-Hand); Regulator, Door And End Gate Window
- Position: Rear Driver Side
- Replaces: 15095069, 15076798, 15893782, 19301971, 10356992, 15205952
- Item Weight: 4.90 Pounds
- Item Dimensions: 25.1 x 16.4 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19331462
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 GMC Envoy Submodels:
- Denali, SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
View related parts
2003 GMC Envoy Window Regulator, Front Driver Side
Part Number: 19331466
$132.31 MSRP: $259.05
You Save: $126.74 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator Assembly, Front Side Door Window (W/O Motor) (Left-Hand); Regulator, Door And End Gate Window; Regulator, Door Inner Control
- Position: Front Driver Side
- Replaces: 10357004, 15095067, 15205950, 15944000, 15893784, 25824839, 10360625, 15155113, 20930663, 19301968
- Item Weight: 6.00 Pounds
- Item Dimensions: 30.3 x 17.0 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19331466
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 GMC Envoy Submodels:
- Denali, SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
View related parts
2003 GMC Envoy Window Regulator, Front Passenger Side
Part Number: 19331461
$132.31 MSRP: $259.07
You Save: $126.76 (49%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Regulator Assembly, Front Side Door Window (W/O Motor) (Right-Hand); Power Window Motor and Regulator Assembly; Regulator, Door And End Gate Window; Regulator, Door Inner Control
- Position: Front Passenger Side
- Replaces: 15205951, 20930664, 25824840, 10357005, 10360626, 15095068, 15893785, 19301969, 15155114, 15944001
- Item Weight: 6.20 Pounds
- Item Dimensions: 29.4 x 17.7 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19331461
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 GMC Envoy Submodels:
- Denali, SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
View related parts
2003 GMC Envoy Window Regulator, Rear Passenger Side
Part Number: 19301978
Product Specifications
- Other Name: Regulator, Rear Door Window Regulator; Power Window Motor and Regulator Assembly
- Position: Rear Passenger Side
- Replaces: 10356991, 15111923, 15205955, 15142775, 15169272, 15893781, 21996410
- Item Weight: 4.40 Pounds
- Item Dimensions: 25.2 x 16.6 x 9.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19301978
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 GMC Envoy Submodels:
- Denali, SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
View related parts
2003 GMC Envoy Window Regulator, Rear Passenger Side
Part Number: 19331463
Product Specifications
- Other Name: Regulator, Rear Door Window Regulator; Power Window Motor and Regulator Assembly; Regulator, Door And End Gate Window
- Position: Rear Passenger Side
- Replaces: 15076799, 15095070, 10356993, 15893783, 19301970, 15205953
- Item Weight: 5.20 Pounds
- Item Dimensions: 8.2 x 25.0 x 16.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19331463
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 GMC Envoy Submodels:
- Denali, SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS

2003 GMC Envoy Window Regulator

With a comprehensive array of OEM 2003 GMC Envoy Window Regulator, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2003 GMC Envoy Window Regulator are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2003 GMC Envoy Parts Questions & Experts Answers

Q: How to replace the front door window regulator on 2003 GMC Envoy?
A: You must start the front door Window Regulator replacement by taking off the door trim panel alongside the speaker and water deflector. The first step involves disconnecting the electrical connector from the regulator motor while you lift and support the window and then loosen the bolts from the regulator window carrier. Proceed by loosening the regulator assembly bolts which connect it to the door and then detach the remaining 3 bolts used to secure the combination of regulator assembly and motor. Raise the regulator assembly upwards to unfasten upper 2 bolts while rotating the elevated part toward the front and finally extract the piece through the door opening onto a prepared surface. Users should take out the upper 2 bolts attached to the regulator assembly. Start by connecting the upper 2 regulator assembly bolts and position it semi-horizontally until the forward section reaches the door cavity then complete the vertical rotation. Lower the regulator assembly to the door sheet metal while using the upper 2 bolts for hanging. The motor retention bolt for the door reaches 9 n.m (80 lb in) torque strength before adding the remaining door bolts for the regulator assembly at 10 n.m (88 lb in). You must connect the electrical parts to the motor before disconnecting the support and having the window slide down the carrier. After allowing the regulator window carrier bolts to become slightly loose proceed with opening the window to its highest position within the run channels before fully tightening bolts to 10 n.m (88 lb in). Installation concludes with inserting the water deflector and speaker while putting on the door trim panel.