Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 19331463
Window Regulator, Rear Passenger Side

2002-2009 GM

Customer Questions & Expert Answers (15)
GM 19331463 Window Regulator, Rear Passenger Side
  • Part Description
    Regulator, Rear Door Window Regulator; Power Window Motor and Regulator Assembly
  • Position
    Rear Passenger Side
  • Replaces
    15076799, 15095070, 10356993, 15893783, 19301970, 15205953
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • 2004 GMC Envoy Window Regulator, Rear Passenger Side Diagram for 19331463
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 19331463

  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2007 Buick RainierCXL, CXL Plus6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2009 Chevrolet TrailblazerBase, LS, LT, LTZ, North Face, SS6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2002-2006 Chevrolet Trailblazer EXTLS, LT, North Face6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2009 GMC EnvoyDenali, SLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2006 GMC Envoy XLDenali, SLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2004-2005 GMC Envoy XUVSLE, SLT6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
    2002-2004 Oldsmobile BravadaBase6 Cyl 4.2 L GAS
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is this 19331463 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19331463 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the procedure for tightening the regulator window carrier bolts for the 2007 Buick Rainier? Posted by Customer
    A:
    Loosely tighten the regulator window carrier bolts, operate the window upward to the full up position, ensure it remains in the run channels, and then tighten the bolts to 10 N.m (89 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Window Regulator
    Q:
    What is the torque specification for the motor bolt for the 2006 Buick Rainier? Posted by Customer
    A:
    Tighten to 9 N.m (80 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Window Regulator
    Q:
    What should be done after reconnecting the electrical connector to the regulator motor for the 2002 Chevrolet Trailblazer? Posted by Customer
    A:
    Remove the window support and lower the window onto the regulator window carrier.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Window Regulator
    Q:
    What should be done after removing the window for the 2002 Chevrolet Trailblazer? Posted by Customer
    A:
    Disconnect the electrical connector from the regulator motor and loosen the upper 2 bolts securing the regulator assembly to the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Window Regulator
    Q:
    What should be done after removing the trim panel and water deflector for the 2004 GMC Envoy? Posted by Customer
    A:
    Detach the bolts retaining the front door window to the window regulator and then remove the window.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Window Regulator
    Q:
    What are the final steps after reinstalling the endgate window for the 2005 Chevrolet Trailblazer? Posted by Customer
    A:
    Reinstall the endgate inner panel reinforcement, the endgate trim panel, and the regulator bolt access plugs, and perform an endgate window learn cycle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Window Regulator
    Q:
    How do you install the regulator side rails for the 2004 Chevrolet Trailblazer? Posted by Customer
    A:
    Insert the nuts into the keyhole slots and tighten them to 25 N.m (18 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Window Regulator
    Q:
    What should be done after removing the door trim panel for the 2003 GMC Envoy? Posted by Customer
    A:
    Loosen the regulator window carrier bolts, raise and support the window, and disconnect the electrical connector from the regulator motor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Window Regulator
    Q:
    What should be done after removing the window for the 2002 GMC Envoy? Posted by Customer
    A:
    Disconnect the electrical connector from the regulator motor and loosen the upper 2 bolts retaining the regulator assembly to the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Window Regulator
    Q:
    How should the regulator assembly be positioned during installation for the 2008 GMC Envoy? Posted by Customer
    A:
    Insert the assembly through the door opening in a semi-horizontal position, fully position it forward into the door cavity, and rotate it to a vertical position.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Window Regulator
    Q:
    What is the first step to replace the rear side door window regulator for the 2009 Chevrolet Trailblazer? Posted by Customer
    A:
    Begin by removing the door trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Window Regulator
    Q:
    What is the first step to replace the rear side door window regulator for the 2008 GMC Envoy? Posted by Customer
    A:
    Begin by removing the door trim panel, water deflector, and speaker.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Window Regulator
    Q:
    What should be disconnected from the regulator motor for the 2009 GMC Envoy? Posted by Customer
    A:
    The electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Window Regulator
    Q:
    How should the regulator window carrier bolts be tightened for the 2007 GMC Envoy? Posted by Customer
    A:
    Loosely tighten the regulator window carrier bolts, operate the window to the full up position ensuring it remains in the run channels, and then tighten the regulator window carrier bolts to 10 N.m (88 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Window Regulator
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Window Regulator, Rear Passenger Side 19331463 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19331463 Window Regulator, Rear Passenger Side is available in the market under the name GM Window Regulator. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19331463 Window Regulator, Rear Passenger Side fits certain Chevrolet Trailblazer, Trailblazer EXT models, as well as GMC Envoy, Envoy XL, Envoy XUV. Additionally, it is compatible with Buick Rainier and Oldsmobile Bravada models.
The original GM component designated by manufacturer part number 19331463 maintains top performance when functioning as the Regulator, Rear Door Window Regulator; Power Window Motor and Regulator Assembly unit at its Rear Passenger Side. The component 19331463 is constructed from durable material and its dimensions span 8.2 x 25.0 x 16.5 inches while weighing 5.20 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Regulator, Door And End Gate Window. The part 19331463 has available replacement options 15076799, 15095070, 10356993, 15893783, 19301970, 15205953. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.