Other Name: Regulator Assembly, Front Side Door Window (W/O Motor) (Right-Hand); Power Window Motor and Regulator Assembly; Regulator, Door And End Gate Window; Regulator, Door Inner Control
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2009 Chevrolet Trailblazer Submodels:
Base, LS, LT, LTZ, North Face, SS | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
2009 Chevrolet Trailblazer Window Regulator
With a comprehensive array of OEM 2009 Chevrolet Trailblazer Window Regulator, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Chevrolet Trailblazer Window Regulator are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2009 Chevrolet Trailblazer Parts Questions & Experts Answers
Q: How to replace the rear side door window regulator on 2009 Chevrolet Trailblazer?
A: Start the rear side door Window Regulator replacement by detaching the door trim and the water deflector and the speaker before continuing. Proceed by first untightening the regulator window carrier bolts then suspend and support the window before removing the electrical connector from the motor. You must remove the 3 door bolts securing the assembly before removing the entire regulator element from the door structure. Start by putting the Window Regulator assembly into the door opening then tighten the 3 bolts to 10 nm (89 lb in). Next install the electrical connector back to the regulator motor and detach the window support. After that lower the window onto the regulator window carrier. Loosen the regulator window carrier bolts slightly then move the window to maximum upward position while keeping it on the run channels before securing the bolts at 10 nm (89 lb in). Place the speaker along with water deflector together with door trim panel back into their proper locations.