Other Name: Regulator Assembly, Front Side Door Window (W/O Motor) (Right-Hand); Power Window Motor and Regulator Assembly; Regulator, Door And End Gate Window; Regulator, Door Inner Control
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2004-2007 Buick Rainier | CXL, CXL Plus | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
Buick Rainier Window Regulator
Our website offers an extensive catalog of genuine Buick Rainier Window Regulator at unbeatable prices. Every OEM Buick Rainier Window Regulator comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Buick Rainier Window Regulator Parts Questions & Experts Answers
Q: How to replace the rear side door window regulator on Buick Rainier?
A: Starting to replace the rear side door Window Regulator requires users to first take off door trim panel together with water deflector and then disconnect the speaker. Before commencing work on the regulator window carrier bolts start by lifting and supporting the window. First disconnect the electrical connector from the regulator motor before removing the 3 bolts (W706202) to disassemble the Window Regulator assembly from the door. Then take out the Window Regulator assembly itself. Insert the Window Regulator assembly into the door opening while installing the 3 bolts (W706202) according to 10 n.m (89 lb in) of torque. After connecting the electrical connector to the regulator motor you can take out the window support while lowering the window onto the regulator window carrier. Secure the regulator window carrier bolts lightly then open the window to its highest position while maintaining it inside the channels before tightening these bolts to 10 n.m (89 lb in). Reinstall the speaker followed by the water deflector then put back the door trim panel.