OEM 2004 GMC Envoy Front Cross-Member

Front Engine Cross Member
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Front Cross-Members found

  • 2004 GMC Envoy Front Cross-Member Diagram - 15090722
    View related parts
    Product Specifications
    • Other Name: Crossmember, Transmission Support; Transfer Case Mount; Transmission Mount; Trans Crossmember; Crossmember, Transmission Mounting
    • Replaces: 15020364
    • Item Weight: 10.90 Pounds
    • Item Dimensions: 7.8 x 36.8 x 3.5 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 15090722
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2004 GMC Envoy Submodels:
    • Denali, SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
  • 2004 GMC Envoy Front Cross-Member Diagram - 15085421
    View related parts
    Product Specifications
    • Other Name: Crossmember, Intermediate (Transmission Support Cross Member); Crossmember; Crossmember, Intermediate(Transmission Support Cross Member)
    • Item Weight: 11.10 Pounds
    • Item Dimensions: 32.8 x 10.6 x 3.8 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 15085421
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2004 GMC Envoy Submodels:
    • Denali, SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS

2004 GMC Envoy Front Cross-Member

With a comprehensive array of OEM 2004 GMC Envoy Front Cross-Member, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 GMC Envoy Front Cross-Member are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 GMC Envoy Front Cross-Member Parts and Q&A

  • Q: How to replace the front cross-member in a 4WD on 2004 GMC Envoy?
    A: To replace the transmission cross member on a 4wd vehicle, one must jack it up and apply support to the transmission with a suitable stand or jack before starting such procedures. Take off the nuts that hold the transmission mount to the transmission support, then raise the transmission. Next, remove the vertical bolts that hold the transmission support from the frame, and the horizontal nuts and bolts securing the transmission support. After removing, take the transmission support from frame. For installation, set the transmission support back on the contour of the frame and loosely mount horizontal nuts and bolts. It is essential to follow the fastener notice in service precautions. Next, roughly mount the vertical bolts holding the transmission support. Tighten horizontal nuts to 50 n.m (37 lb ft) and horizontal bolts 100 n.m (74 lb ft). Reduce the transmission, attach the nuts to transmission mount, eliminate the stand or jack, and lastly lower the automobile.

Related 2004 GMC Envoy Parts