How to Replace a Tailgate Handle on an End Gate on 2003 GMC Sonoma?

Start by removing the handle grip screws and liftgate trim panel during tailgate handle replacement. Start by removing the liftgate handle rod retainer and afterward remove the bolts (W705202S) that secure the liftgate outside handle to the liftgate. Finally take out the liftgate outside handle. To start the installation process secure the liftgate outside handle to the liftgate according to Service Precautions Fastener Notice. Use parts W705202S and apply 4 N.m torque (35 lb in) to bolt the handle into place. The liftgate handle rod installation must begin with attaching the rod to the tailgate handle followed by tight retaining before putting back the liftgate trim panel.

OEM 2003 GMC Sonoma Tailgate Handle

Back Door Handle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Tailgate Handle found

View related parts
2003 GMC Sonoma Handle Part Number: 15007218
$82.84 MSRP: $104.22
You Save: $21.38 (21%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle, End Gate Lock
- Item Weight: 1.50 Pounds
- Item Dimensions: 6.5 x 4.3 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15007218
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 GMC Sonoma Submodels:
- SL, SLE, SLS | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS

2003 GMC Sonoma Tailgate Handle

With a comprehensive array of OEM 2003 GMC Sonoma Tailgate Handle, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2003 GMC Sonoma Tailgate Handle are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2003 GMC Sonoma Tailgate Handle Parts and Q&A

Q: How to Replace a Tailgate Handle on an End Gate on 2003 GMC Sonoma?
A: Start by removing the handle grip screws and liftgate trim panel during tailgate handle replacement. Start by removing the liftgate handle rod retainer and afterward remove the bolts (W705202S) that secure the liftgate outside handle to the liftgate. Finally take out the liftgate outside handle. To start the installation process secure the liftgate outside handle to the liftgate according to Service Precautions Fastener Notice. Use parts W705202S and apply 4 N.m torque (35 lb in) to bolt the handle into place. The liftgate handle rod installation must begin with attaching the rod to the tailgate handle followed by tight retaining before putting back the liftgate trim panel.