OEM 2004 Buick Regal Crankshaft Position Sensor

2004 Buick Regal Parts Questions & Experts Answers

• Q: How to replace the Crankshaft Position Sensor on 2004 Buick Regal?

  A: In order to remove the crankshaft position (CKP) sensor, first you should disconnect the negative Battery Cable and lift and support the vehicle. Get rid of the crankshaft Harmonic Balancer and then loose the ckp sensor and its electrical connector. Carefully pry off the ckp sensor shield but not pry part with a pry bar, then ckp sensor studs and finally the ckp sensor itself. When it comes to installation, you should start with ckp sensor placement as well as attaching it via the ckp sensor studs, which should be tightened up to 30 n.m (22 lb ft) according to the fastener notice. Next, reinstall the ckp sensor shield and reconnect ckp sensor electrical connector. Change the crankshaft Harmonic Balancer, lift the vehicle, and reconnect the negative Battery Cable. Finally, do the crankshaft position system variation learn procedure.