ChevyParts
My Garage
My Account
Cart
OEM 2004 Buick Regal Oxygen Sensor
Oxygen O2 Sensor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Oxygen Sensors found
2004 Buick Regal Oxygen Sensor
Part Number: 19178747$83.90 MSRP: $151.86You Save: $67.96 (45%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Sensor, Computer Control Sensors
- Replaced by: 19355307
- Item Weight: 0.60 Pounds
- Item Dimensions: 8.1 x 2.1 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19178747
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2004 Buick Regal Oxygen Sensor
Part Number: 19209807$87.79 MSRP: $178.30You Save: $90.51 (51%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Sensor, Computer Control Sensors; Rear Oxygen Sensor; Front Oxygen Sensor
- Replaces: 12570149, 12574924, 12572772
- Item Weight: 0.50 Pounds
- Item Dimensions: 8.4 x 3.4 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19209807
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2004 Buick Regal Oxygen Sensor
Part Number: 19209814$59.22 MSRP: $120.28You Save: $61.06 (51%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Sensor Assembly, Heated Oxygen (Position 1); Front Oxygen Sensor; Sensor, Computer Control Sensors
- Replaces: 12574218
- Item Weight: 0.50 Pounds
- Item Dimensions: 8.2 x 3.2 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19209814
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2004 Buick Regal Oxygen Sensor
With a comprehensive array of OEM 2004 Buick Regal Oxygen Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Buick Regal Oxygen Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2004 Buick Regal Parts Questions & Experts Answers
- Q: How to Replace a Heated Oxygen Sensor (HO2S) Without Damaging the Pigtail and Connector on 2004 Buick Regal?A: Assessing a heated Oxygen Sensor (HO2S) requires several necessary tools including the Oxygen Sensor wrench (J 39194). Oxygen Sensor wrench (J 39194). The ho2s along with its Oxygen Sensor arrives with an integral pigtail and connector that users must not detach because damage to this equipment will degrade the sensor's ability to function properly. When handling the ho2s and o2s maintain cautious behavior to keep in-line electrical connectors and the louvered end free from dirt by cleaning them with no chemicals. The removal process starts by lifting up and holding the vehicle steady. Remove the retaining tab from the ho2s electrical connector then disconnect it. The Oxygen Sensor wrench (J 39194) helps extract the ho2s from its placement within the Exhaust Pipe. The Oxygen Sensor setup begins with Exhaust Pipe installation of the sensor while applying special anti-seize compound to the threads. New service oxygen sensors arrive with anti-seize compound already applied but reused sensors require anti-seize compound p/n 12377953 or its equivalent for coating application. Using the Oxygen Sensor wrench (J 39194) tighten the Oxygen Sensor until it reaches 41 n.m (30 lb ft). After connecting ho2s connector to ho2s electrical connector install the retaining tab to secure the connection then position the vehicle back to its original height.
Related 2004 Buick Regal Parts
2004 Buick Regal Camshaft Position Sensor
2004 Buick Regal Coolant Temperature Sensor
2004 Buick Regal Crankshaft Position Sensor
2004 Buick Regal Dipstick
2004 Buick Regal Engine Control Module
2004 Buick Regal Ignition Coil
2004 Buick Regal Ignition Control Module
2004 Buick Regal Knock Sensor
2004 Buick Regal MAP Sensor
2004 Buick Regal Spark Plug
2004 Buick Regal Spark Plug Wires
2004 Buick Regal Throttle Position Sensor