OEM 2004 Cadillac DeVille Brake Caliper Bracket

2004 Cadillac DeVille Parts Questions & Experts Answers

• Q: How to replace the rear brake caliper bracket (without J55) on 2004 Cadillac DeVille?

  A: Support the brake caliper with heavy mechanic's wire when you remove it from the bracket before maintaining the hydraulic flexible hose connection to avoid damage. Start by taking off the brake pads and Brake Pad retainers attached to the Brake Caliper Bracket then move to dislodging the Brake Caliper Bracket bolts. You should disconnect the rear Brake Caliper Bracket from the lower Control Arm before wiping down any rust and debris from the Brake Caliper Bracket. Check the brake mounting, hardware and Brake Caliper Bracket for damage. Replace any component that is cracked. You should prepare the fore and aft ends of the lower caliper bracket bolts with threadlocker gm p/n 12345493 (Canadian P/N 10953488) after cleaning the threaded holes with denatured alcohol or an equivalent solution. Ensure the ends are free of gaps during this process. You should let the threadlocker cure for 10 minutes before actually mounting and tightening the Brake Caliper Bracket with a torque of 128 nm (94 ft. Lbs.). Begin by applying a thin layer of niglube to the brake caliper pin bolts which must be followed by Brake Pad retainer and Brake Pad installation onto the Brake Caliper Bracket before putting in the brake caliper.