OEM 2004 Chevrolet Astro Ignition Coil

2004 Chevrolet Astro Ignition Coil Parts Questions & Experts Answers

• Q: How to replace the ignition coil on 2004 Chevrolet Astro?

  A: Start by removing the engine cover to gain access while also disconnecting all electrical connectors. You will need to disconnect the Ignition Coil wire from the Distributor followed by removing the studs that anchor the bracket and Ignition Coil to the Intake Manifold. Extract the bracket and its installed Ignition Coil before drilling and punching out the two rivets that secure the Ignition Coil to the bracket in order to detach the coil from its bracket. Add the Ignition Coil onto the bracket using the screws from the replacement kit according to service precautions fastener notice. Fasten the Ignition Coil and bracket tightly to the Intake Manifold by using the studs at 11 nm (97 lb in.). Then join the Ignition Coil wire while making sure it stays away from all parts including the dip stick which could potentially start electrical issues. After this use the electrical connectors to continue and put back the engine cover.