Other Name: Belt Kit, Passenger Seat (Retractor Side) *Graphite *Graphite; Seat Belt Assembly; Belt & Retractor; Kits for An3, Am6, A52, Rear Jump Seat.
Other Name: Belt Kit, Am6- Front Split Bench; Center Belt Assembly
Position: Front Passenger Side
Item Weight: 0.80 Pounds
Item Dimensions: 5.2 x 2.6 x 2.1 inches
Condition: New
SKU: 12477771
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2004 Chevrolet Blazer Submodels:
Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
2004 Chevrolet Blazer Seat Belt
With a comprehensive array of OEM 2004 Chevrolet Blazer Seat Belt, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Chevrolet Blazer Seat Belt are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2004 Chevrolet Blazer Seat Belt Parts Questions & Experts Answers
Q: How to replace the rear seat belt on 2004 Chevrolet Blazer?
A: The process starts by removing both the rear seat assembly followed by taking off the lower seat belt anchor plate which is attached to the rear seat bolt. Dismantle first the upper seat belt anchor bolt cover and following that the bolt which stabilizes the upper seat belt anchor plate. Proceed by removing the body side trim panel before guiding the seat belt through the open space. Start by detaching the bolt that maintains the seat belt retractor assembly before removing the retractor assembly from the vehicle. Begin seat belt retractor assembly installation by mounting it inside the vehicle then fasten it with the bolt which should remain at 70 N.m (52 lb ft). Insert the car seat belt from the outside through the opening in the body side trim panel before replacing the body side trim panel. The upper seat belt anchor plate should be installed to the vehicle and secured to the vehicle with a 70 N.m (52 lb ft) bolt tension. Begin the installation process by placing up the upper seat belt anchor bolt cover and after that install the lower seat belt anchor plate to the rear seat bolt before placing back the rear seat assembly.