How to replace the Crankshaft Position Sensor on 2004 Chevrolet Colorado?

Before starting the Crankshaft Position (CKP) Sensor replacement process you must raise and support the vehicle. Remove the CKP sensor by first disconnecting its engine wiring harness electrical connector and removing the bolt holding the sensor against the engine block. Keep both O-ring seals for disposal. You must install fresh O-ring seals onto the CKP sensor after applying a small amount of clean engine oil on them. Insert the CKP sensor into the engine block. Use sealer GM P/N 12346004 (Canadian P/N 10953480) on the bolt threads before installing the CKP sensor bolt secured at 10 N.m (89 lb in). Attach the engine wiring harness electrical connector back to the CKP sensor after which you should lower the vehicle to execute the CKP System Variation Learn Procedure.

OEM 2004 Chevrolet Colorado Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Crankshaft Position Sensor found

View related parts
2004 Chevrolet Colorado Crankshaft Position Sensor
Part Number: 12588097
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Crankshaft Sensor
- Item Weight: 0.50 Pounds
- Item Dimensions: 6.1 x 4.1 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12588097
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Colorado Submodels:
- Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS

2004 Chevrolet Colorado Crankshaft Position Sensor

With a comprehensive array of OEM 2004 Chevrolet Colorado Crankshaft Position Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Chevrolet Colorado Crankshaft Position Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Chevrolet Colorado Parts Questions & Experts Answers

Q: How to replace the Crankshaft Position Sensor on 2004 Chevrolet Colorado?
A: Before starting the Crankshaft Position (CKP) Sensor replacement process you must raise and support the vehicle. Remove the CKP sensor by first disconnecting its engine wiring harness electrical connector and removing the bolt holding the sensor against the engine block. Keep both O-ring seals for disposal. You must install fresh O-ring seals onto the CKP sensor after applying a small amount of clean engine oil on them. Insert the CKP sensor into the engine block. Use sealer GM P/N 12346004 (Canadian P/N 10953480) on the bolt threads before installing the CKP sensor bolt secured at 10 N.m (89 lb in). Attach the engine wiring harness electrical connector back to the CKP sensor after which you should lower the vehicle to execute the CKP System Variation Learn Procedure.

Related 2004 Chevrolet Colorado Parts

Alternate Year Models

2005 Chevrolet Colorado Crankshaft Position Sensor