OEM 2004 Chevrolet Venture Spark Plug Wires

2004 Chevrolet Venture Parts Questions & Experts Answers

• Q: How to replace the Spark Plug Wires on 2004 Chevrolet Venture?

  A: Begin Spark Plug wire replacement by turning off the ignition. Release the Spark Plug wire boot by twisting it one-half turn before gently pulling the boot to prevent damaging the wire. Disconnect front bank Spark Plug wires 2, 4, and 6 from their spark plugs while releasing them from their retaining clips. First rotate the engine forward before removing Spark Plug wires (1, 3, 5) and their retaining clips from the rear bank spark plugs. The next procedure involves removing the Spark Plug wires by detaching them from the ignition coils then removing them from the motor compartment. For wire replacement care must be taken to transfer boot heat shields along with Spark Plug wire conduit and retaining clips. Begin the installation by first connecting the Spark Plug wires to the ignition coils and afterwards joining wires (1, 3, 5) to rear bank spark plugs before securing them in their retaining clips. Position the engine properly before securing the front bank Spark Plug wires (2, 4, 6) to their retaining clips.